PTL-MMB02 Programmable Desktop Dip Coater with Touch Screen Control and Drying Oven up to 100°C
The PTL-MMB02 is engineered for laboratory research requiring precise and repeatable dip coating of substrates with liquid solutions. It is particularly suited for preparing uniform optical or epitaxial thin films by automating the immersion and withdrawal of samples at controlled speeds within a temperature-regulated environment.
This desktop unit integrates a digital touch screen controller that allows users to program dipping and pulling speeds between 1 and 200 mm/min with high accuracy, dwell times up to 999 seconds, and up to 20 coating cycles. The included drying oven maintains temperatures from 50 to 100°C with ±1°C precision, facilitating solvent evaporation and film formation during coating processes.
Wichtigste Merkmale
- 6-inch color LCD touch screen for intuitive programming of speed, distance, dwell time, and cycle count.
- Programmable dipping and pulling speeds from 1 to 200 mm/min with ±0.05% accuracy.
- Adjustable travel distance up to 60 mm for precise sample immersion control.
- Temperature-controlled oven chamber (280 mm cubic volume) with stainless steel interior, adjustable from 50 to 100°C.
- Sample holder equipped with two screw clips to secure substrates up to 3″ length and 2″ width, supporting weights up to 250 g.
- Includes a 150 mL beaker and holder for coating solutions.
- Stepping motor drive ensures smooth and accurate vertical motion.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Betriebsspannung | 110/220 V AC selectable |
| Travel Distance | 0–60 mm adjustable |
| Dipping/Pulling Speed | 1–200 mm/min programmable, ±0.05% accuracy |
| Systemsteuerung | 6″ LCD color touch screen |
| Dwell Time | Up to 999 seconds |
| Cycle Count | Up to 20 cycles |
| Sample Holder | Two screw clips for samples sliding on guide rods |
| Max Sample Size | 3″ (L) x 2″ (W) |
| Max Sample Weight | Less than 250 g |
| Solution Container | One 150 mL beaker included |
| Oven Temperature Range | 50–100°C, ±1°C accuracy |
| Oven Chamber Dimensions | 280 mm x 280 mm x 280 mm |
| Oven Inner Material | Stainless steel |
| Motor Type | Stepping motor |
| Max Power Consumption | 600 W |
| Zertifizierungen | CE-zertifiziert; NRTL oder CSA optional gegen Aufpreis |
Typische Anwendungsbereiche
The PTL-MMB02 is ideal for research and development of thin film coatings in optics, electronics, and materials science. It supports uniform deposition of films from liquid precursors on substrates requiring precise control of coating parameters and drying conditions.
It is commonly used in conjunction with plasma cleaners for substrate surface preparation and ultrasonic processors to homogenize coating solutions for improved film quality.
Hinweise zur Konfiguration und zum Betrieb
The system includes a sample holder with two screw clips and a beaker holder for the coating solution. Optional accessories such as plasma cleaners and ultrasonic processors are recommended to enhance coating performance but are not included.
Users should ensure sample weight does not exceed 250 g and that substrates fit within the maximum size limits. The oven temperature should be carefully controlled to avoid thermal damage to sensitive samples.
Maße & Versand
| Product dimensions | 406mm(L) x 406mm(W) x 610mm(H) |
|---|
