MSK-HRP-01 Electric Hot Rolling Press with 4″ Width, Variable Speed, and 100°C Max Temperature for Battery Electrode Preparation
The MSK-HRP-01 is engineered specifically for laboratory-scale densification of battery electrodes, particularly in lithium-ion battery research. It enables researchers to increase the active material density of coated electrodes by applying controlled rolling pressure and heat, which is critical for optimizing electrode performance. Its compact design and compatibility with inert gas atmospheres such as argon make it suitable for sensitive materials and glove box integration.
This hot rolling press operates with a maximum temperature of 100°C for short durations and 80°C for continuous use, controlled precisely within ±1°C. The rollers have a diameter of 96mm and an effective width of 96mm, with an adjustable rolling gap from 0 to 1.2mm, allowing fine control over the final electrode thickness. The high torque 24V DC motor with a 1:75 reducing gear provides variable linear roller speeds up to 26 mm/s, ensuring consistent rolling pressure and speed.
Wichtigste Merkmale
- Maximum heating temperature of 100°C with precision temperature control (±1°C) and 500W heating power.
- Roller diameter and width of 96mm, with adjustable gap from 0 to 1.2mm for precise thickness control.
- High torque 24V DC motor compatible with argon gas environments, featuring variable speed up to 26 mm/s.
- Dial gauge accuracy of 0.01mm for precise gap measurement.
- Surface hardness of rollers rated HRC 60-62; suitable for materials with hardness below 50HRC.
- Compact design suitable for glove box integration and battery electrode R&D.
- CE certified with optional NRTL or CSA certification available.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Effective Cylinder Width | 96 mm |
| Roller Size | 96 mm Diameter × 100 mm Width |
| Rolling Gap | 0 to 1.2 mm adjustable |
| Dial Gauge Accuracy | 0,01 mm |
| Heating Temperature | Max 100°C (less than 1 hour), 80°C continuous; heating rate 1.3°C/min; 500W heating element |
| Genauigkeit des Temperaturreglers | ±1 °C |
| Motor | 24V DC high torque motor with 1:75 reducing gear, 40W rated power, 0.8A current |
| Speed Range | 0 to 26 mm/s linear roller speed |
| Roller Surface Hardness | HRC 60-62 (max material hardness 50HRC) |
| Stromversorgung | AC 208-240V, single phase, 50/60Hz (220V plug not included) |
Typische Anwendungsbereiche
The MSK-HRP-01 is primarily used in battery research laboratories for densifying coated electrodes in lithium-ion batteries. It is effective for reducing electrode thickness and increasing packing density, which improves electrochemical performance. The press is also suitable for producing free-standing 2D metal nanosheets through repeated folding and calendaring of stacked metal sheets.
Hinweise zur Konfiguration und zum Betrieb
- The MSK-HRP-04 Roll-to-Roll system can be optionally integrated for automatic film unwinding and winding.
- Rollers must be cleaned with acetone after each use to prevent contamination and corrosion.
- Do not roll materials harder than 50HRC to avoid damage.
- Multi-step rolling with thickness decrements no greater than 0.02 mm per pass is recommended for best results.
- Heating above 100°C is not advised to prevent roller deformation.
- Regular lubrication of roller bearings extends service life.
- Suitable for operation in argon gas environments; equipped with a 24V DC motor for safe use under inert atmosphere.
- Not suitable for use in hazardous or flammable gas environments (Class I locations).
