GSL-1200X-MGI-6 Six-Channel 50mm Quartz Tube Furnace for High-Throughput Annealing up to 1200°C
The GSL-1200X-MGI-6 is engineered to facilitate high-throughput heat treatment of alloy and ceramic materials, enabling researchers to efficiently study phase diagrams and material properties. This furnace accommodates six independent quartz tubes, each with an outer diameter of 50 mm and length of 460 mm, allowing simultaneous processing of multiple sample batches under varied temperature conditions.
Each heating channel is equipped with a Ni-Cr-Al resistance wire element and controlled independently by a 24-segment programmable temperature controller, supporting precise temperature programming up to 1200°C. The system includes six S-type thermocouples for accurate temperature monitoring and features over-temperature and broken thermocouple alerts to ensure operational safety.
Wichtigste Merkmale
- Six independent heating modules with 50 mm OD high-purity quartz tubes (460 mm length each).
- Maximum operating temperature of 1200°C with ±1.0°C temperature accuracy.
- Integrated quick-seal KF25 flanges with mechanical vacuum gauges and needle valves for vacuum or controlled gas atmospheres.
- Supports vacuum levels down to 10-5 torr using a single turbopump connected via KF25 port.
- Programmable temperature controllers with RS485 communication port and PC control software for monitoring and recording.
- Heating rate up to 20°C per minute for efficient thermal processing.
- Includes four flowmeters for precise gas flow control during annealing.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Modell | GSL-1200X-MGI-6 |
| Tube Diameter | 50 mm outer diameter |
| Tube Length | 460 mm |
| Number of Channels | 6 independent heating modules |
| Heating Element | Ni-Cr-Al resistance wire |
| Höchsttemperatur | 1200°C |
| Temperaturgenauigkeit | ±1.0°C |
| Temperaturregelung | 24-segment programmable controllers, RS485 communication |
| Thermocouples | 6 S-type thermocouples |
| Vakuumfähigkeit | Down to 10-5 torr with turbopump (single pump via KF25 port) |
| Gas Flow Control | 4 flowmeters included |
| Erwärmungsgeschwindigkeit | Up to 20°C/min |
| Power & Voltage | 10 kW, 208-240 V single phase, 50/60 Hz |
| Safety Features | Over-temperature and broken thermocouple alerts |
| Zertifizierungen | CE certified; NRTL (UL61010) or CSA available on request |
Typische Anwendungsbereiche
This furnace is well-suited for research laboratories focusing on phase diagram exploration, alloy and ceramic material annealing, and other high-throughput thermal processing tasks requiring precise temperature control and atmosphere management.
Hinweise zur Konfiguration und zum Betrieb
The furnace includes six quartz tubes, four flowmeters, quick-seal KF25 flanges, a mechanical vacuum gauge, and needle valves. A single turbopump can be connected via the KF25 port to achieve high vacuum levels. Users must install a pressure regulator on their gas supply to prevent overpressure, as the maximum furnace pressure is 7.5 PSI (0.5 atm). Power cable is supplied without a plug; users should install an appropriate plug locally. Optional modifications are available for larger chemical vapor deposition (CVD) systems with custom gas delivery setups.
