KSL-600X-AC-5S Five-Side Heating Atmosphere Controlled Muffle Furnace with 216L Capacity and 600°C Max Temperature
The KSL-600X-AC-5S furnace is engineered for laboratory applications requiring controlled atmosphere heat treatment with precise temperature uniformity. It supports vacuum or inert gas environments, enabling oxidation-sensitive or reducing atmosphere processes up to 600°C continuously. This furnace is ideal for materials research, sintering, annealing, and other thermal processes demanding stable and uniform heating.
The furnace chamber measures 609 × 609 × 609 mm, providing a total volume of 216 liters. It employs five-sided heating elements—right, left, top, back, and front—to achieve a uniform temperature zone of 500 × 500 × 500 mm within ±3°C at 600°C. The heating elements are Kanthal Fe-Cr-Al resistance wires embedded in high-quality alumina fiber insulation, ensuring efficient thermal performance and durability.
Wichtigste Merkmale
- Hermetically sealed chamber supporting vacuum and controlled inert, reducing, or oxidative atmospheres.
- Five-sided heating design for superior temperature uniformity and process consistency.
- PID temperature controller (FA-YD518P-AG) with 30 programmable segments and ±1°C control accuracy.
- Integrated vacuum system with mechanical and digital gauges, achieving vacuum levels below 0.1 torr after baking.
- Gas flow control via two 10 L/min float flow meters for precise atmosphere regulation.
- Includes a 960 L/min rotary vane vacuum pump and a 16 L/min recirculating water chiller for temperature and system stability.
- Optional Eurotherm temperature controller upgrade for enhanced control with ±0.1°C fluctuation.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Maximale Betriebstemperatur | 600°C continuous; up to 1000°C for less than 1 hour |
| Heating Chamber Dimensions | 609 × 609 × 609 mm (24″ × 24″ × 24″) |
| Gleichmäßige Erwärmung der Fläche | 500 × 500 × 500 mm ±3°C at 600°C |
| Heizelemente | Kanthal Fe-Cr-Al resistance wire |
| Insulation Material | High-quality alumina fiber |
| Stromversorgung | 19.5 kW, 208-240 V, 3-phase, 50/60 Hz (other voltages available on request) |
| Temperaturregler | FA-YD518P-AG PID with 30 programmable segments, ±1°C accuracy, RS485 PC communication |
| Vakuumfähigkeit | Below 0.1 torr after 24-hour baking; KF40 port; mechanical and digital vacuum gauges included |
| Gas Flow Control | Two 10 L/min float flow meters |
| Vakuumpumpe | 960 L/min rotary vane pump, 208-240 V, 1.5 kW, single phase |
| Wasserkühlung | 16 L/min recirculating water chiller with alarms |
| Sample Load Capacity | Up to 50 kg |
| Erwärmungsgeschwindigkeit | Recommended <10°C/min; max 20°C/min |
| Thermoelement | Omega Dual K Type, 12″ length, 1/4″ OD |
Typische Anwendungsbereiche
This furnace is suitable for advanced materials processing including sintering ceramics, annealing metals, oxidation or reduction treatments, and research requiring controlled atmospheres such as inert gas or vacuum. It supports processes sensitive to oxygen or moisture and is used in laboratories focused on materials science, electronics, and chemical synthesis.
Hinweise zur Konfiguration und zum Betrieb
Optional shelves made from SS 316 stainless steel with customizable dimensions and spacing are available to optimize sample arrangement. The furnace includes safety alarms for over-temperature and water chiller failure. It is not recommended for use with toxic, corrosive, or flammable gases without consultation. Installation and training services can be provided upon request at additional cost.
