PTL-MMB01 Programmable Desktop Dip Coater with Adjustable 1-200 mm/min Speed and Integrated Drying Oven up to 100°C
The PTL-MMB01 is engineered for laboratory-scale fabrication of uniform thin films by dipping substrates into coating solutions with precise control over immersion and withdrawal speeds. This capability is essential for research and development of optical and epitaxial films where coating uniformity and reproducibility are critical.
Equipped with a stepping motor and a single-board computer (SBC) controller, the system allows users to program dipping and pulling speeds between 1 and 200 mm per minute, as well as adjust the travel distance up to 200 mm. An integrated drying oven with stainless steel chamber and digital temperature controller supports curing processes at temperatures from 50 to 100°C with ±1°C accuracy, enhancing film quality and adhesion.
Key Features
- Programmable dipping and pulling speeds from 1 to 200 mm/min with digital panel control.
- Adjustable travel distance up to 200 mm for precise coating length.
- Sample holder with two screw clips for secure mounting of substrates up to 3″(L) x 2″(W) and 250 g weight.
- Included 150 mL beaker and dedicated beaker holder for coating solutions.
- Integrated drying oven with stainless steel interior, temperature range 50-100°C, and ±1°C control accuracy.
- Selectable working voltage of 110/220V AC to accommodate different power standards.
- CE certification ensuring compliance with safety and quality standards.
Technical Specifications
| Parameter | Specification |
|---|---|
| Working Voltage | 110/220V AC selectable |
| Dipping/Pulling Speed | 1-200 mm/min adjustable, digital control |
| Travel Distance | 0-200 mm adjustable |
| Sample Holder | Two screw clips for substrates |
| Max Sample Size | 3″ (L) x 2″ (W) |
| Max Sample Weight | Less than 250 g |
| Solution Container | One 150 mL beaker included |
| Dipping/Pulling Motor | Stepping motor |
| Oven Power Consumption | 600 W max |
| Oven Chamber Dimensions | 280 mm x 280 mm x 280 mm |
| Oven Inner Material | Stainless steel |
| Oven Temperature Range | 50-100°C, ±1°C accuracy |
| Certifications | CE Certified; NRTL certification available on request |
Typical Applications
The PTL-MMB01 is suited for research laboratories focusing on thin film coatings for optical devices, epitaxial film development, and surface functionalization. It supports preparation of uniform coatings from liquid solutions, including colloidal suspensions and polymer films.
Configuration & Operating Notes
The system includes a single 150 mL beaker and a sample holder with two screw clips. For multi-sample processing, consider models with multiple positions. Substrate pre-treatment such as plasma cleaning and solution homogenization via ultrasonic processing are recommended to improve coating quality. The oven temperature should be monitored to avoid overheating sensitive samples.
