GSL-1100X-MGI-16-R 16-Channel Rocking Tube Furnace with Independent Temperature Control up to 1100°C for High-Throughput Alloy and Ceramic Heat Treatment
The GSL-1100X-MGI-16-R is engineered to facilitate high-throughput heat treatment experiments involving alloys and ceramic materials. It enables researchers to process up to 16 samples simultaneously, each within its own quartz tube furnace module, allowing for precise and independent temperature and atmosphere control. This capability supports comparative studies and accelerated material development workflows.
Each of the 16 heating modules contains a 25 mm outer diameter quartz tube and is equipped with quick-seal flanges, vacuum ports, and gas flow controls. The furnace system integrates a rocking mechanism to agitate samples during treatment, enhancing uniformity and reaction kinetics. Temperature control is programmable via a 6-inch touchscreen interface, with accuracy within ±1°C and heating rates up to 10°C per minute.
Key Features
- 16 independent tube furnace modules with individual temperature control up to 1100°C
- High purity quartz tubes (25 mm O.D. x 20 mm I.D. x 200 mm length) included
- Rocking stage with adjustable angle (-15° to +15°) and frequency (25 cycles/min) for sample agitation
- Quick-seal stainless steel flanges with gas inlet/outlet and vacuum ports for controlled atmospheres
- Programmable 30-segment temperature controller with 6″ touchscreen interface
- Gas flow and vacuum capability with single vacuum pump connection via KF25 port
- Heating element composed of NiCrAl alloy wire for reliable performance
Technical Specifications
| Parameter | Specification |
|---|---|
| Number of Channels | 16 independent tube furnaces |
| Tube Dimensions | Quartz tube 25 mm O.D. x 20 mm I.D. x 200 mm length |
| Maximum Continuous Temperature | 1000°C |
| Maximum Short-Term Temperature | 1100°C (under 1 hour) |
| Temperature Accuracy | ±1°C |
| Constant Temperature Zone | ±2°C within 20 mm cubic zone; ±5°C within 55 mm cubic zone |
| Heating Rate | Up to 10°C/min |
| Power Supply | AC 220V ±10%, single-phase, 50/60 Hz |
| Maximum Power | 13 kW |
| Rocking Angle | -15° to +15° |
| Rocking Frequency | 50 swings per minute (25 cycles/min) |
| Heating Element | NiCrAl alloy wire |
| Temperature Control | 30-segment programmable controller with 16 K-type thermocouples |
| Vacuum Capability | Max vacuum 10^-2 torr (mechanical pump), 10^-5 torr (turbopump) |
| Certifications | CE certified; optional NRTL (UL61010) or CSA at extra cost |
Typical Applications
This furnace system is ideal for research requiring simultaneous heat treatment of multiple samples under controlled atmospheres and temperatures, such as alloy development, ceramic sintering, and materials science studies involving metal-gas interactions. The rocking function aids in uniform heat distribution and reaction kinetics.
Configuration & Operating Notes
The system includes 16 quartz tubes with quick-seal flanges, needle valves for gas flow control, and vacuum ports compatible with a single vacuum pump via a 16-to-1 adapter. The power control unit features a touchscreen interface for programming temperature profiles. Users must install a plug on the power cable as it is not included. A pressure regulator is required on gas supply lines to prevent overpressure beyond 7.5 PSI. Optional software for PC control is available. The furnace can be modified for larger chemical vapor deposition (CVD) applications with appropriate gas delivery systems.
