UBSC-LD50 Ultrasonic Scanning System for Non-Destructive Testing of Pouch and Prismatic Cells
The UBSC-LD50 ultrasonic scanning system is engineered to support detailed non-destructive testing (NDT) of lithium-ion pouch and prismatic cells. It enables researchers and quality control engineers to assess critical internal conditions such as electrolyte diffusion, early-stage gas formation, sealing performance, and lithium plating without damaging the cells. This capability is essential for battery development, failure analysis, and lifecycle prediction.
The system employs ultrasonic C scanning technology using both transmission and reflection wave modes to generate high-resolution images of the internal cell structure. It accommodates cells up to 600 mm in length, 300 mm in width, and 70 mm in thickness. The scanning resolution ranges from 0.5 mm to 30 mm depending on cell thickness, with scan times varying between approximately 1 to 10 minutes per cell. The device operates safely at low ultrasonic power (<100 mW) and supports testing temperatures from room temperature up to 80 °C ± 0.5 °C.
주요 기능
- Non-destructive detection of electrolyte distribution and diffusion status within pouch and prismatic cells.
- Identification of early-stage gassing and lithium plating phenomena to aid in cell health monitoring.
- Leak detection and sealing performance evaluation for quality assurance.
- Ultrasonic C scanning with transmission and reflection imaging modes for comprehensive internal analysis.
- XY axis translational scanning stage for precise and repeatable positioning.
- Temperature-controlled oil bath tank with silicone oil coupling medium to ensure consistent ultrasonic coupling.
- Integrated software for motion control, ultrasonic parameter adjustment, and real-time imaging display.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Applicable Cell Types | Pouch cells, Prismatic cells |
| Scanning Method | Ultrasonic C scanning with transmission and reflection |
| Maximum Scanning Area | 600 mm (L) x 300 mm (W) |
| Maximum Scanning Thickness | 70 mm |
| 결의안 | 0.5 mm to 30 mm (dependent on cell thickness) |
| Scanning Speed | Approximately 1 to 10 minutes per cell (dependent on cell size) |
| Operating Temperature Range | Room Temperature to 80 °C ± 0.5 °C |
| Ultrasonic Transducers | Two pairs at 2.0 MHz and 250 kHz, power < 100 mW |
| Coupling Medium | Liquid (Silicone oil recommended) |
| Power Supply | AC 208 – 240 V, Three phase, 50/60 Hz, 13.5 kW |
| Software Functions | XY axis motion control, ultrasonic parameter setting, transmission and reflection wave display, scanning image visualization |
| Compliance | CE Certified |
대표적인 적용 분야
The UBSC-LD50 is suited for battery research and development laboratories focusing on lithium-ion pouch and prismatic cells. It facilitates early detection of internal defects such as gas formation and lithium plating, supports electrolyte stability studies, and aids in cycle life prediction. It is also valuable for quality control in battery manufacturing to verify sealing integrity and electrolyte distribution.
Configuration and Operating Notes
The system includes an XY translational scanning stage, ultrasonic power source, signal sampling system, battery analyzer, temperature-controlled oil bath tank, and calibration thermometer. Silicone oil is recommended as the coupling medium to ensure effective ultrasonic transmission. The low ultrasonic power (<100 mW) ensures safe operation without damaging sensitive battery cells. Optional accessories and detailed operation manuals and videos are provided to support user training and system integration.
Dimensions & Shipping
| Product dimensions | 1,500 mm Length x 1,000 mm Width x 2,150 mm Height |
|---|
