MSK500B Benchtop Grooving Machine for Cylindrical Cells Ø10-50mm Diameter, 20-140mm Length
The MSK500B is engineered to facilitate precise grooving operations on cylindrical battery cell casings, accommodating diameters ranging from 10 mm to 50 mm and lengths from 20 mm up to 140 mm. This flexibility is achieved by replacing the die set, allowing adaptation to various standard cylindrical cell formats including 18650, 21700, and customizable sizes upon request. Its compact footprint enables integration within gloveboxes, supporting controlled environments for sensitive battery research and manufacturing processes.
Operation is streamlined through a PLC touchscreen interface, providing intuitive control over grooving parameters. The machine requires an air pressure supply exceeding 0.5 MPa, with safety considerations for gas cylinder use involving a two-stage pressure regulator. The grooving depth is adjustable between 0.8 mm and 2.0 mm, while groove width can be set from 0.9 mm to 1.5 mm, with a standard width of 1.2 mm. The grooving accuracy is maintained within ±0.1 mm, ensuring consistent and reliable results for battery casing preparation.
주요 기능
- Compatible with cylindrical cell casings from Ø10 mm to Ø50 mm diameter and 20 mm to 140 mm length.
- Equipped with PLC touchscreen for easy parameter adjustment and operation.
- Adjustable groove depth (0.8–2.0 mm) and width (0.9–1.5 mm) with ±0.1 mm accuracy.
- Compact design suitable for glovebox installation and operation.
- Standard set includes 18650 grooving dies; other sizes available on request.
- Requires air pressure >0.5 MPa; air compressor not included.
- CE certified with patented technology for cylindrical cell grooving.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Working Voltage | AC 220V ±10%, Single Phase, 50Hz (AC110V version available via transformer) |
| Max. Power Consumption | 300 W |
| Air Pressure Requirement | >0.5 MPa (Air compressor not included; two-stage pressure regulator required if using gas cylinder) |
| Casing Compatibility | Diameter Ø10–50 mm; Length 20–140 mm; Standard 18650 dies included; customizable sizes available |
| Grooving Depth | 0.8 mm to 2.0 mm, adjustable |
| Grooving Width | Standard 1.2 mm; adjustable 0.9 mm to 1.5 mm |
| Grooving Accuracy | ±0.1 mm |
| 인증 | CE Certified; Patent 201120464651.8 |
대표적인 적용 분야
The MSK500B is primarily used in battery research and manufacturing for preparing cylindrical cell casings by creating precise grooves necessary for subsequent sealing and assembly steps. It supports a range of cylindrical cell formats commonly used in lithium-ion battery development.
구성 및 작동 안내
The machine includes one set of 18650 grooving dies as standard. Additional die sets for other sizes such as 3260, 4680, and 21700 can be ordered separately. After grooving, sealing of the cylindrical case cap is recommended using a compatible sealing machine (e.g., MSK-510). When using a gas cylinder instead of an air compressor, a two-stage pressure regulator must be installed to ensure safe and stable air pressure within the required operating range.
