DZF-6050-II Dual Vacuum Oven with Two Independent 53L Chambers, 200ºC Max Temperature, and Single Vacuum Pump
The DZF-6050-II is engineered to support battery research and manufacturing workflows requiring controlled drying and baking under vacuum conditions. It is particularly suited for processing cathode and anode materials, where moisture removal and thermal treatment are critical. This model integrates two separate vacuum chambers, each with a volume of 53 liters, allowing simultaneous but independent operation to optimize throughput and process flexibility.
Each chamber is constructed from stainless steel (1Cr18Ni9Ti) with reinforced welding for durability and features a silicone gasket with a positive latch door to ensure vacuum integrity. The oven operates at temperatures ranging from room temperature plus 10°C up to 200°C, with precise control within ±1°C. Both chambers share a single mechanical vacuum pump, included in the package, capable of achieving vacuum levels down to 133 Pa (approximately 10-2 Torr), suitable for sensitive battery material processing.
주요 기능
- Two independent heating chambers, each 16″ x 14″ x 15″ (415 x 345 x 373 mm), 53 liters capacity
- Maximum operating temperature of 200ºC with ±1ºC accuracy
- Single mechanical vacuum pump included, with exhaust filter and SS bellows for connection
- Vacuum level achievable down to 133 Pa (10-2 Torr)
- Dual temperature controllers for independent chamber control
- Stainless steel chamber construction with silicone door gasket and positive latch for reliable sealing
- Mobile two-layer cart included for convenient placement and mobility
기술 사양
| 매개변수 | 사양 |
|---|---|
| 모델 | DZF-6050-II |
| Chamber Quantity | Two independent chambers |
| Chamber Size (W x H x D) | 16″ x 14″ x 15″ (415 x 345 x 373 mm) |
| Chamber Volume | 53 liters per chamber, total 106 liters |
| 최고 기온 | 200ºC |
| 온도 범위 | Room Temperature +10ºC to 200ºC |
| Temperature Accuracy | ±1ºC |
| Vacuum Level | 133 Pa (10-2 Torr) |
| 진공 펌프 | Mechanical pump, 240 L/min, 750W, included |
| Power Supply | Single Phase AC 110-120V, 50/60 Hz, 2800 W (two outlets required) |
| Chamber Material | Stainless steel 1Cr18Ni9Ti with bracing pieces |
| Door Seal | Silicone gasket with positive latch |
| Safety Features | Built-in over-temperature protection |
| Certifications | NRTL certified (110V), CE certified |
대표적인 적용 분야
This dual vacuum oven is ideal for drying, baking, and vacuum storage of battery electrode materials, including cathodes and anodes, during battery fabrication and R&D processes. It supports moisture-sensitive materials by maintaining a controlled vacuum environment and precise temperature control.
구성 및 작동 안내
The oven includes a mobile two-layer cart for convenient placement of both chambers. The single mechanical vacuum pump connects to both chambers via stainless steel bellows with KF 25 ports. An exhaust filter is provided to protect the pump. Users should avoid direct contact of samples with chamber walls to prevent contamination or damage. After high-temperature operation, chamber discoloration is normal and does not affect performance. Temperature calibration kits are available separately to ensure measurement accuracy.
