MSKAFAIII-FSC125V110 Economic Flat Slot Die Coater with Heating Vacuum Bed and 50/100mm Coating Width Options
The MSKAFAIII-FSC125V110 is engineered to support advanced research in thin film coatings, particularly for applications such as perovskite solar cells, proton exchange membranes in fuel cells, and battery electrode fabrication. This coater enables controlled deposition of uniform films by precisely regulating slurry flow and coating parameters.
Its core mechanism employs a flat slot die head available in two coating widths, 50 mm or 100 mm, allowing flexibility depending on sample size and coating requirements. The system integrates a heated vacuum bed that secures substrates during coating and can be heated up to 100ºC with a digital temperature controller ensuring ±1ºC accuracy for consistent drying and curing conditions.
주요 기능
- Flat slot die head with selectable coating widths of 50 mm or 100 mm for versatile film deposition.
- Heated vacuum chuck (200 mm x 365 mm) with integrated heating elements reaching 100ºC max and precise digital temperature control.
- Digital-controlled syringe pump included, capable of infusion rates up to 25 mL/hr with selectable units (mL/hr, µL/hr, mL/min, µL/min).
- Built-in micrometer head for manual adjustment of the gap between slot die and substrate; optional digital micrometer available for enhanced precision.
- Variable travel speed from 0 to 80 mm/sec and adjustable travel distance up to 400 mm for controlled coating processes.
- Vacuum chuck constructed from aluminum alloy with small holes to hold substrates firmly during coating.
- CE certified with optional NRTL or CSA certification available upon request.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Power Supply | 110 VAC or 208-240 VAC, 50/60 Hz (selectable) |
| Power Consumption | 1500 W |
| Coating Width | 50 mm or 100 mm (slot die head options) |
| Syringe Pump Max Flow Rate | 25 mL/hr with 60 mL syringe |
| Syringe Pump Units | mL/hr, µL/hr, mL/min, µL/min |
| Micrometer Head | Manual built-in; optional digital micrometer with 0.003 mm accuracy and 1″ travel |
| Travel Speed | 0 – 80 mm/sec variable |
| Travel Distance | 0 – 400 mm adjustable |
| Vacuum Chuck Area | 200 mm (W) x 365 mm (L) |
| Vacuum Chuck Material | Aluminum alloy with small holes |
| Heating Max Temperature | 100ºC with ±1ºC digital control |
대표적인 적용 분야
Ideal for coating research in perovskite solar cells, fuel cell proton exchange membranes, and battery electrode fabrication. Suitable for developing uniform thin films with controlled thickness and composition.
구성 및 작동 안내
The coater includes a digital-controlled syringe pump and connection tubing. A digital micrometer head is available as an optional upgrade for enhanced gap adjustment precision. Operation under a fume hood is recommended for safety and optimal coating quality. Additional accessories such as vacuum mixers and slurry viscosity testers may be used to improve slurry uniformity and coating consistency.
