RE-1002 10L Rotary Evaporator with Digital Speed Control, Stainless Steel Heating Bath, and Vertical Condenser
The RE-1002 rotary evaporator is engineered for laboratory applications requiring effective solvent evaporation and material separation. It accommodates a 10-liter evaporating flask and a 5-liter receiving flask, making it suitable for medium-scale chemical research and distillation processes. This system enables controlled evaporation by rotating the flask within a heated bath, facilitating efficient solvent removal from samples.
The device operates by heating the rotating flask in a stainless steel bath, which can be filled with water or oil depending on the temperature requirements. Vaporized solvents are condensed via a vertical condenser with a cooling surface area of 0.57 square meters, supported by a vacuum system to enhance evaporation efficiency. The vacuum pump and water chiller are available as optional accessories to optimize performance under reduced pressure and controlled cooling conditions.
주요 기능
- Digital control for rotation speed (0–120 rpm) and heating temperature for precise process management.
- 10-liter stainless steel heating bath with temperature range from room temperature to 180 °C (water bath up to 99 °C, oil bath up to 200 °C).
- Vertical condenser providing 0.57 m² cooling surface for efficient vapor condensation.
- Manual lifting mechanism with 150 mm stroke for easy flask positioning.
- Evaporation rates approximately 3.2 L/hr for water and 8.6 L/hr for ethanol under standard conditions.
- Optional oilless vacuum pump with maximum vacuum of 2.62 Torr to enhance solvent evaporation.
- Optional recirculating water chiller operating between 5–30 °C to maintain condenser cooling efficiency.
기술 사양
| 매개변수 | 사양 |
|---|---|
| 모델 | RE-1002 |
| Evaporating Flask Capacity | 10 L |
| Receiving Flask Capacity | 5 L |
| Rotation Speed Range | 0–120 rpm (DC motor with digital display) |
| Heating Bath Material | Stainless steel |
| Heating Bath Volume | 10 L |
| Heating Temperature Range | Room temperature to 99 °C (water bath), up to 200 °C (oil bath) |
| Temperature Accuracy | ±0.2 °C |
| Manual Lifting Stroke | 150 mm |
| Condensation Surface Area | 0.57 m² |
| Evaporation Rate (Water) | ~3.2 L/hr |
| Evaporation Rate (Ethanol) | ~8.6 L/hr |
| Power Supply | AC 208–240 V, 50/60 Hz, single phase |
| Maximum Power Consumption | 3500 W (3000 W heating bath, 200 W motor) |
대표적인 적용 분야
The RE-1002 rotary evaporator is widely used in chemical laboratories for solvent removal, sample concentration, and purification of chemical mixtures. It is suitable for pharmaceutical research, organic synthesis, and environmental analysis where controlled evaporation and distillation are required.
구성 및 작동 안내
The system includes the rotary evaporator with standard glassware (10 L evaporating flask and 5 L receiving flask) and a stainless steel heating bath. Optional accessories include an oilless vacuum pump for enhanced evaporation under reduced pressure and a recirculating water chiller to maintain condenser cooling efficiency. Operators should ensure proper connection of vacuum and cooling systems when these options are used. The manual lifting mechanism allows safe and convenient flask positioning. The unit requires a stable power supply of AC 208–240 V, 50/60 Hz single phase.
