SE-KTQ-250 Micrometer Adjustable Film Applicator with 250 mm Width and 0-5000 Micron Wet Film Thickness Control
The SE-KTQ-250 film applicator is engineered to provide precise control over wet film thickness for laboratory-scale coating applications. It is particularly suited for producing uniform films in ceramic tape casting, battery electrode fabrication, and various other research coatings where consistent film quality is critical. The applicator’s design facilitates even distribution of slurry materials, enabling reproducible and accurate film casting results.
This device incorporates micrometer heads that allow the operator to finely adjust the clearance of the stainless steel knife blade, which has a precision-ground edge. The micrometer adjustment provides a controllable accuracy of 10 microns, enabling wet film thicknesses ranging from 0 up to 5000 microns. The applicator includes a built-in slurry guiding plate to ensure even coating material distribution ahead of the blade, with a slurry capacity of approximately 100 ml. The standard coating width is 250 mm, accommodating a variety of sample sizes.
주요 기능
- Micrometer heads enable precise blade clearance adjustment with 10 micron increments.
- Stainless steel knife blade with precision ground edge for consistent film quality.
- Standard 250 mm coating width suitable for diverse laboratory applications.
- Built-in slurry guiding plate ensures uniform slurry distribution before coating.
- Wet film thickness adjustable from 0 to 5000 microns for versatile coating needs.
- Slurry reservoir capacity of 100 ml supports efficient material use.
- Optional upgrade to digital micrometers available for enhanced accuracy and instant unit conversion.
기술 사양
| 매개변수 | 사양 |
|---|---|
| 모델 | SE-KTQ-250 |
| Coating Width | 250 mm |
| Wet Film Thickness Range | 0 – 5000 microns |
| Blade Adjustment | Micrometer heads with 10 micron accuracy |
| Slurry Capacity | 100 ml |
| Blade Material | Stainless steel with precision ground edge |
| Additional Features | Built-in slurry guiding plate for even coating distribution |
대표적인 적용 분야
The SE-KTQ-250 is widely used in material research laboratories for producing uniform wet films in ceramic tape casting processes, battery electrode coatings, and other thin film applications requiring precise thickness control. It supports experimental workflows where reproducibility and fine adjustment of film thickness are essential.
구성 및 작동 안내
Replacement parts such as springs and micrometer heads are available separately to maintain optimal performance. For enhanced precision, users may opt to upgrade to digital micrometer heads, which offer 0.003 mm accuracy and instant inch/millimeter conversion. Operators should ensure careful handling of the stainless steel blade and maintain cleanliness of the slurry guiding plate to achieve consistent coating results.
