SE-KTQ-180 Micrometer Adjustable Film Applicator with 180 mm Coating Width and 0-5000 Micron Wet Film Thickness
The SE-KTQ-180 film applicator is engineered for laboratory environments requiring precise control over wet film thickness during coating processes. It is particularly suited for applications such as ceramic tape casting, battery electrode fabrication, and other material research tasks where uniform thin films are essential. The device enables researchers to produce consistent coatings with minimal material waste and high reproducibility.
This applicator employs micrometer heads to adjust the clearance of a stainless steel knife blade with a precision-ground edge. The micrometers allow fine control of the blade gap with an accuracy of 10 microns, enabling wet film thicknesses ranging from 0 up to 5000 microns. A built-in slurry guiding plate ensures even distribution of coating material ahead of the blade, supporting uniform film formation across the 180 mm effective coating width.
주요 기능
- Micrometer heads provide precise blade clearance adjustment with 10 micron resolution.
- Effective coating width of 180 mm suitable for various laboratory-scale coatings.
- Wet film thickness adjustable from 0 to 5000 microns for versatile application needs.
- Stainless steel knife blade with precision-ground edge for consistent film quality.
- Integrated slurry guiding plate ensures even coating material distribution.
- Slurry reservoir capacity of 100 ml supports continuous coating without frequent refills.
- Optional digital micrometer upgrade available for enhanced accuracy and instant unit conversion.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Effective Coating Width | 180 mm |
| Wet Film Thickness Range | 0 – 5000 microns |
| Micrometer Head Accuracy | 10 microns |
| Slurry Capacity | 100 ml |
| Blade Material | Stainless Steel with Precision Ground Edge |
| Slurry Guiding Plate | Built-in for even material distribution |
대표적인 적용 분야
The SE-KTQ-180 is widely used in research laboratories for producing uniform thin films in ceramic tape casting, battery electrode coating, and other experimental coating processes requiring precise wet film thickness control. It supports development and testing of new materials and formulations by enabling reproducible film deposition.
구성 및 작동 안내
Replacement parts such as springs and micrometer heads are available separately to maintain precise operation. Users can optionally upgrade to digital micrometer heads offering 0.001 mm resolution, 0.003 mm accuracy, and instant inch/millimeter conversion for enhanced measurement precision. Proper handling of the stainless steel blade and regular calibration of micrometers are recommended to ensure consistent coating quality and device longevity.
