JTFM380 Hot Rolling Laminating Press with Manual Hydraulic Pressure up to 1200 kgF and Max 130°C Heating, Optional Widths 340/480/1000 mm
The JTFM380 is engineered for laboratory-scale hot lamination processes requiring controlled temperature and pressure. It is particularly suited for research applications involving multilayer liquid crystal polymers (LCP), flexible electronic devices, and solid-state lithium-ion batteries, where precise lamination conditions are critical to material performance and device integrity.
This model employs a double-sided lamination approach with heating applied solely to the top roller, which is constructed from A3 steel. The bottom roller is made of high-temperature rubber to ensure effective lamination contact. Optional configurations with stainless steel (SS304) rollers for both top and bottom are available upon request. Pressure is manually applied via a built-in hydraulic pump capable of generating up to 1200 kg force, monitored by an integrated pressure gauge. The laminating temperature can be adjusted within a range of 60 to 130°C, and lamination speed is variable from 0.5 to 30 meters per minute.
주요 기능
- Double-sided lamination with heating applied to the top roller only.
- Manual hydraulic pump delivers up to 1200 kg force with pressure gauge feedback.
- Adjustable laminating temperature range from 60°C to 130°C.
- Variable lamination speed between 0.5 and 30 meters per minute.
- Optional roller widths of 340 mm, 480 mm, and 1000 mm to accommodate different sample sizes.
- Top roller made of A3 steel; bottom roller made of high-temperature rubber; SS304 rollers available optionally.
- Optional electric oil pump for automatic pressure control up to 15 MPa (sold separately).
기술 사양
| 매개변수 | 사양 |
|---|---|
| 모델 | JTFM380 |
| Maximum Laminating Width | 340 mm (optional 480 mm, 1000 mm) |
| Roller Diameter | Φ192 × 380 mm |
| Roller Material | Top: A3 Steel; Bottom: High-temperature Rubber (SS304 optional) |
| Laminating Temperature Range | 60–130°C |
| Laminating Speed | 0.5–30 m/min |
| 최대 압력 | Up to 1200 kg force via manual hydraulic pump |
| Power Supply | 220 VAC ±10%, Single phase, 50/60 Hz, 5 kW |
| Pressure Gauge Range | 2 to 10 MPa corresponding to 240 to 1200 kg force |
| Optional Accessories | Electric oil pump for automatic pressure control (up to 15 MPa), SS304 rollers |
대표적인 적용 분야
The JTFM380 is widely used in research and development environments for lamination of multilayer liquid crystal polymers, fabrication of flexible electronic components, and assembly of solid-state lithium-ion batteries. Its precise temperature and pressure control enable consistent lamination quality essential for advanced material and device prototyping.
구성 및 작동 안내
The standard configuration includes the laminating press with manual hydraulic pressure application and integrated pressure gauge. Optional upgrades include an electric oil pump for automated pressure control and alternative roller materials. Operators should ensure proper temperature and pressure settings according to sample requirements and observe safety precautions when handling heated components and hydraulic systems.
