GSL-1700X-ASD-80 Automated Tube Furnace with 80mm Alumina Tube and 1700°C Max Temperature
The GSL-1700X-ASD-80 is engineered to meet the demanding requirements of AI-driven material research by providing fully automated thermal processing within a controlled atmosphere. It incorporates an 80 mm inner diameter alumina tube designed for high-temperature treatments up to 1700°C, enabling precise synthesis and characterization of advanced materials. The system automates critical steps including vacuum sealing, purging, pressure regulation, heating, cooling, and flange operation, all controlled via PC software to minimize manual intervention and improve experimental repeatability.
This tube furnace integrates a double-layer steel structure with high-purity alumina fiber insulation to optimize energy efficiency and maintain a stable 170 mm heating zone with a ±1°C temperature uniformity over a 60 mm constant temperature region. The included alumina tube measures 80 mm outer diameter, 74 mm inner diameter, and 1000 mm length. Automated pressure control is achieved through built-in digital pressure sensors capable of regulating chamber pressure from 1 Pa to 200 kPa, supported by a mass flow controller for precise gas flow management. The system also includes a water-cooled stainless steel flange with silicone O-rings and valves to ensure airtight conditions during heat treatment.
주요 기능
- Fully automated operation controlled via PC software with programmable temperature, pressure, and gas flow parameters.
- Max working temperature of 1700°C for short durations and 1600°C continuous operation with ±1°C accuracy.
- 80 mm ID alumina tube (80 OD x 74 ID x 1000 mm length) included for high-temperature sample processing.
- Integrated digital pressure sensor and mass flow controller for automatic chamber pressure and gas flow regulation.
- Water-cooled stainless steel airtight flanges with motorized opening/closing and compressive air assistance.
- Includes rotary vacuum pump achieving vacuum levels down to 10 Pa and capability for up to 10⁻⁴ torr depending on vacuum pump.
- Optional robotic sample loading system enabling full automation including remote control and data logging.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Maximum Working Temperature | 1700°C (up to 1 hour), 1600°C continuous |
| Temperature Control Accuracy | ±1°C (PID programmable controller) |
| Heating Zone Length | 170 mm total, 60 mm constant temperature zone |
| Tube Dimensions | Alumina tube 80 mm OD x 74 mm ID x 1000 mm length |
| Pressure Range | 1 Pa to 200 kPa (digital sensor control) |
| Vacuum Level | Down to 10 Pa with included rotary pump; up to 10⁻⁴ torr depending on vacuum pump |
| Gas Flow Rate | 0 to 2000 ml/min (mass flow controller) |
| Power Supply | 220 VAC ±10%, 20A breaker, single phase, 50/60 Hz, 3 kW |
| Control Interface | 15″ laptop with software; RJ45 port for PC or wireless router connection |
| Included Accessories | Alumina tube, crucible holder (alumina or graphite), water chiller, rotary vacuum pump, compressive pump |
대표적인 적용 분야
This furnace is ideal for AI-assisted material synthesis and characterization requiring precise atmosphere and temperature control, such as advanced ceramics, semiconductor materials, and nanomaterials research. Its automation capabilities support high-throughput experiments with minimal manual intervention.
구성 및 작동 안내
The system includes software for programming temperature profiles, pressure setpoints, gas flow rates, and purging cycles up to 30 segments. Flange operation is motorized and can be controlled remotely. Optional integration with robotic sample loaders enables fully automated sample handling and data logging. Safety precautions include ensuring proper water cooling for flanges and verifying vacuum pump operation before use. NRTL or CSA certification can be provided upon request at additional cost.
