KSL1500X-BSA Compact Automatic Bottom Loading Furnace with 6x6x6″ Chamber and 1500°C Max Temperature
The KSL1500X-BSA furnace is engineered for laboratory applications requiring precise thermal treatment of materials within a compact footprint. Its 6 x 6 x 6 inch (150 x 150 x 150 mm) heating chamber accommodates sample volumes up to 3 liters, making it suitable for research tasks demanding controlled high-temperature environments. The furnace is designed to integrate seamlessly into standard gloveboxes, enabling safe handling of sensitive or reactive samples under inert atmospheres.
This model supports automated workflows by interfacing with robotic systems through an open communication protocol, facilitating fully unattended operation in autonomous research laboratories. The bottom-loading design allows samples to be loaded and unloaded via a door that closes automatically during heating cycles, enhancing safety and process repeatability. Cooling fans installed in the lower chamber accelerate sample cooldown after processing, improving throughput.
주요 기능
- Heating chamber dimensions: 150 mm (W) x 150 mm (L) x 150 mm (H) with 3 L capacity
- Maximum continuous operating temperature of 1400°C; short-term peak up to 1500°C (under 30 minutes)
- 1500°C-grade silicon carbide heating elements for uniform and stable heating
- PID automatic temperature control with auto-tune and ±1°C accuracy
- Bottom-loading mechanism with automatic door operation for safe sample handling
- Cooling fans in lower chamber enable rapid cooling rates up to 20°C/sec
- Optional remote computer control software supports up to 50 programmable temperature segments and multi-unit management
기술 사양
| 매개변수 | 사양 |
|---|---|
| 모델 | KSL1500X-BSA |
| Heating Chamber Size | 150 x 150 x 150 mm (6″ x 6″ x 6″) |
| Chamber Capacity | 3 Liters (0.1 cubic feet) |
| Maximum Continuous Temperature | 1400°C |
| Maximum Peak Temperature | 1500°C (less than 30 minutes) |
| Heating Elements | 1500°C-grade Silicon Carbide (SiC) |
| Thermocouple Type | S-type |
| Heating Rate | 10°C per minute |
| 온도 제어 | PID with auto-tune, ±1°C accuracy |
| Power Supply | 208-240 VAC, 50/60 Hz, single phase, max 6 kW |
| Cooling System | Lower chamber cooling fans, cooling rate up to 20°C/sec |
| Communication Interface | RJ45 Ethernet for PC or wireless router connection |
대표적인 적용 분야
The KSL1500X-BSA furnace is ideal for high-temperature sintering, annealing, and material synthesis within inert or controlled atmospheres. Its compatibility with gloveboxes and robotic automation makes it well suited for advanced materials research, including battery materials development, ceramics processing, and semiconductor sample preparation.
구성 및 작동 안내
The furnace includes a power cable without a plug; users must install a plug suitable for their laboratory power standards. Optional KF40 feedthroughs for glovebox integration and remote computer control software are available at additional cost. The software is pre-installed on a tested computer and supports multi-unit control and programmable temperature profiles. NRTL or CSA safety certification can be requested separately. Proper ventilation and adherence to electrical safety standards are recommended during installation and operation.
