AM-YLJ-8T Automated Pellet Pressing System with 6 Sets of 10 mm ID Dies, Up to 8 Ton Pressing Force
The AM-YLJ-8T is designed to streamline laboratory pellet preparation by automating the entire pressing workflow. It efficiently handles six samples per batch, automating the assembly of pressing dies, the pressing operation itself, disassembly of dies, and retrieval of the formed pellets. This compact system is suitable for glovebox environments and supports a variety of powder materials for pelletization with high accuracy and repeatability.
Operation is controlled through an intuitive LCD touchscreen or PC software, allowing users to program pressing pressure and holding time parameters. The modular design enables standalone use or integration with an automated materials preparation system for fully autonomous experimental workflows. The included software facilitates advanced instrument communication and data acquisition for process monitoring.
주요 기능
- Automates die assembly, pressing, die disassembly, and pellet retrieval for efficient sample throughput.
- Includes six sets of 10 mm inner diameter pressing dies made from hardened tool steel (HRC60-62) for durability.
- Maximum pressing pressure of 1000 MPa (78.6 kN) delivered by the motorized YLJ-8TA press unit.
- Programmable pressing parameters including pressure and dwell time via touchscreen or PC software.
- Compact, glovebox-compatible design suitable for controlled atmosphere environments.
- Processes six samples per batch with a throughput of approximately 60 minutes per batch.
- Modular system can integrate with automated materials preparation for autonomous operation.
기술 사양
| 매개변수 | 사양 |
|---|---|
| 모델 | AM-YLJ-8T |
| 프레스 금형 | 6 sets, 10 mm inner diameter, tool steel (HRC60-62) |
| 최대 압력 | 1000 MPa (78.6 kN) |
| Press Type | Motorized lab press YLJ-8TA |
| Operation Control | Programmable via LCD touchscreen or PC software |
| 전원 입력 | 120 or 208-240 VAC, single phase, 50/60 Hz |
| Power Output | 500 W |
| Throughput | 6 samples per 60 minutes batch |
| Compliance | CE Certified; NRTL certification available upon request |
대표적인 적용 분야
The AM-YLJ-8T is ideal for laboratories requiring consistent and reproducible pellet preparation from powders, such as materials science research, battery electrode fabrication, catalyst development, and powder metallurgy. Its automation reduces manual labor and contamination risk, especially in controlled atmosphere glovebox environments.
구성 및 작동 안내
The system requires manual loading of powders into the six pressing dies before starting the automated program. Optional pressing dies with different diameters are available upon request. Users should ensure proper handling of powders and pellets to maintain sample integrity and safety. Integration with MTI’s automated materials preparation system is possible for fully autonomous operation.
