YLJ-100E Motorized Hydraulic Press with Digital Pressure Display, 100 Metric Tons Capacity for Pellet Sample Preparation
The YLJ-100E is a motorized hydraulic press designed to facilitate the preparation of compound or ceramic pellet samples in laboratory environments. It offers a maximum pressing force of 100 metric tons (980 kN), enabling efficient and consistent sample compaction for material science, chemistry, and ceramics research. This press is especially suited for producing larger pellet samples with precise pressure control.
Equipped with a built-in motorized hydraulic pump powered by a 750W AC motor, the YLJ-100E operates on a standard 220V single-phase power supply. The pressing force is digitally displayed in real time on a control panel, allowing users to monitor and adjust pressure accurately within a range of 10 to 100 metric tons. A mini printer integrated into the system records the applied pressure per sample area, supporting detailed process documentation.
주요 기능
- Maximum pressing force of 100 metric tons (980 kN) with ±1% pressure accuracy via manual hydraulic valve adjustment.
- Digital control panel displays actual pressing force based on sample diameter input.
- Built-in 750W electric hydraulic pump with standard 220V AC power; optional transformer available for 110V operation.
- Bottom hydraulic cylinder travel limited to 20 mm with a range sensing switch to prevent overtravel.
- Working chamber maximum opening dimensions: 250 mm (L) x 300 mm (W) x 300 mm (H); top and bottom platforms each 300 mm in diameter.
- Metal press cover equipped with magnetic door latch for enhanced operator safety; door must be closed during operation.
- Integrated mini printer for recording pressure data per sample area.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Maximum Pressing Force | 100 Metric Tons (980 kN) |
| Pressure Display | Digital, real-time in kN with ±1% accuracy |
| Pressure Adjustment Range | 10 – 100 Metric Tons via manual ON/OFF valve |
| Hydraulic Pump Motor Power | 750 W AC motor |
| Power Supply | 220V ±10%, Single-phase, 50/60 Hz (Optional 110V transformer) |
| Bottom Cylinder Travel Distance | 0 – 20 mm with range sensing switch |
| Top Support Screw Maximum Length | 310 mm (adjustable) |
| Working Chamber Max Opening | 250 L x 300 W x 300 H mm |
| Top & Bottom Platform Diameter | 300 mm |
| Press Cover | Metal door with magnetic door latch |
대표적인 적용 분야
This hydraulic press is ideal for preparing ceramic, compound, and powder samples requiring high-pressure pellet formation. It is widely used in material science, chemistry, and ceramics laboratories for sample compaction, pellet pressing, and quality control testing.
구성 및 작동 안내
- Optional pellet press dies of various diameters and a 32-hole die holder for high-throughput pressing are available separately.
- Regularly check and maintain hydraulic oil level; use AW 46 hydraulic oil as specified.
- Do not exceed the maximum bottom cylinder travel distance of 20 mm to avoid damage.
- Always wear protective goggles during operation for safety.
- Ensure the press cover door is securely closed before starting the press cycle.
- Shut oil release valve and drain oil for transportation or long-term idle storage.
- Operation inside a glove box is not recommended.
