KSL1500XS Compact 1500°C Muffle Furnace with 1.7L Chamber and Programmable PID Controller
KSL1500XS is designed for precise annealing and sintering tasks in research and dental laboratories where a compact footprint and high temperature capability are essential. Its 1.7-liter chamber with internal dimensions of 4.7 inches cubed accommodates small to medium samples requiring controlled thermal processing up to 1500°C for short durations or continuous operation at 1400°C.
This furnace operates using silicon carbide (SiC) U-shaped heating elements and an S-type thermocouple to ensure accurate temperature measurement and control. The included FA-YD518P-AG programmable temperature controller features PID control with auto-tuning, allowing users to program up to 30 segments with ramp, dwell, and cooling steps. Safety features include over-temperature and thermocouple failure alarms. The furnace housing incorporates a high-quality alumina fiber insulation rated to 1700°C, surrounded by a double-layer steel case with an air cooling fan to maintain external surface temperatures below 55°C during operation.
주요 기능
- Maximum temperature of 1500°C for up to 60 minutes; continuous operation at 1400°C
- Compact chamber size: 4.7″ x 4.7″ x 4.7″ (1.7 liters)
- Programmable PID temperature controller with 30-segment ramping and dwell profiles
- SiC U-shaped heating elements (4 pieces) for efficient heating
- Gas inlet and vent ports for controlled atmosphere applications (oxygen or inert gas)
- Drop-down door design for easy sample loading
- Air-cooled double steel outer casing keeps surface temperature below 55°C
기술 사양
| 매개변수 | 사양 |
|---|---|
| Chamber Dimensions (W x D x H) | 4.7″ x 4.7″ x 4.7″ (120 x 120 x 120 mm) |
| Chamber Volume | 1.7 liters |
| Max Temperature | 1500°C (less than 60 minutes) |
| Continuous Working Temperature | 1400°C |
| Heating Rate | 0 to 20°C/min (recommended <10°C/min) |
| Temperature Accuracy | ±1°C |
| 온도 균일도 | ±7°C at 1000°C in 80 x 60 x 80 mm center area |
| Heating Elements | 4 pcs Silicon Carbide (SiC) U-shaped |
| Thermocouple Type | S type with alumina protection tube |
| Power Supply | AC 208-240V, 50/60 Hz, single phase, 2.5 kW (20A breaker required) |
| 무게 | 149.3 lb (67.7 kg) |
| Outer Case | Double-layer steel with air cooling fan |
대표적인 적용 분야
- Annealing and sintering of ceramics, metals, and dental materials
- Material research requiring precise thermal profiles
- Controlled atmosphere heat treatments using gas inlet and vent ports
구성 및 작동 안내
- Standard package includes furnace, 4 SiC heating elements, S-type thermocouple with alumina protection, alumina sample plate, furnace door block, crucible clip, and operation manual
- Power cable included without plug; user must install plug suitable for local power standards
- Optional upgrades available: alumina crucibles, furnace upgrade to 1700°C, laptop with LabVIEW-based temperature control software for remote programming and data logging
- Recommended heating and cooling rates not to exceed 10°C/min to preserve furnace longevity
- Not vacuum sealed; use of toxic or explosive gases requires additional safety measures
- Normal refractory ceramic surface cracking may occur over time; repairable with alumina coating
- Heating elements may require replacement after extended use to maintain performance
