MSK-T18 Manual Die Cutter Set for Pouch Cell and Coin Cell Battery Electrodes with Multiple Die Sizes
The MSK-T18 is a manual die cutter designed specifically for preparing cathode and anode electrodes used in pouch cell and coin cell battery research. It enables researchers to efficiently cut electrode sheets into precise shapes and sizes required for assembling pouch cells or coin cells, facilitating experimental workflows in battery material development and testing.
This cutter set includes multiple dies tailored for different electrode formats: two die cutters for pouch cell electrodes and three dies for coin cell disks. The manual push-down mechanism allows controlled cutting with a maximum depth of 0.2 mm, suitable for thin electrode sheets. The device supports customization of die sizes to accommodate specific research needs.
Wichtigste Merkmale
- Includes two pouch cell die cutters: cathode die (56 mm x 43 mm) and anode die (58 mm x 45 mm) with protruding current collectors.
- Three coin cell dies included for cutting disks of 15 mm (anode), 19 mm (cathode), and 20 mm (separator) diameters.
- Additional set of 16 circular cutters ranging from 6 mm to 55 mm diameter for versatile disk cutting.
- Manual push-down rod operation with a pressing fixture size of 4.7″ x 10.2″ and PVC plate protection for cutting dies.
- Cutting accuracy of ±0.1 mm and maximum cutting depth of 0.2 mm, tested on aluminum laminated film.
- Includes wrenches and screwdriver for adjusting the pushing plate position.
- Custom die sizes available up to 120 mm x 80 mm for pouch cell electrodes upon request.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Pouch Cell Cathode Die Dimensions | 56 mm (L) x 43 mm (W) with 14 mm (L) x 11 mm (W) protruding current collector |
| Pouch Cell Anode Die Dimensions | 58 mm (L) x 45 mm (W) with 13 mm (L) x 11 mm (W) protruding current collector |
| Maximum Customized Die Size | 120 mm (L) x 80 mm (W) including current collector |
| Coin Cell Disk Dies Included | 15 mm (anode), 19 mm (cathode), 20 mm (separator) diameters |
| Additional Circular Cutters | 16 sizes from 6 mm to 55 mm diameter |
| Cutting Depth | Maximum 0.2 mm |
| Cutting Accuracy | ±0.1 mm |
| Betrieb | Manual push-down rod |
| Pressing Fixture Size | 4.7″ x 10.2″ |
| Included Tools | Wrenches and screwdriver for adjustment |
Typische Anwendungsbereiche
The MSK-T18 is ideal for battery research laboratories focusing on pouch cell and coin cell fabrication. It supports cutting of electrode sheets and separators into precise shapes for assembling test cells, enabling cost-effective exploration of new battery materials and configurations. The cutter is compatible with electrode sheets under 100 mm width and can be combined with vacuum sealers and ultrasonic welders for complete pouch cell assembly workflows.
Hinweise zur Konfiguration und zum Betrieb
The cutter set includes preinstalled standard dies for immediate use and a set of 16 circular cutters for various disk sizes. Users can request customized die sizes for specific electrode dimensions at additional cost. The device requires manual operation and does not involve electricity, so no UL certification is necessary. A PVC plate protects the cutting dies during operation. Proper electrode sheet width (<100 mm) is required for insertion. Adjustment tools are provided to fine-tune the pushing plate position for optimal cutting accuracy.
