GSL-500X-XX 100ml Hydrothermal Reactor with Optional Heating Jacket, Titanium or SS316, Up to 4 MPa Pressure
The GSL-500X-XX hydrothermal reactor is engineered for laboratory-scale synthesis requiring controlled high-pressure and temperature environments. It is particularly suited for hydrothermal methods used in preparing advanced and bio-materials, where precise reaction conditions are critical. The reactor’s design accommodates chemical resistance and durability by offering construction in either high purity titanium (>99.95%) or SS316 stainless steel.
This model features a working volume of approximately 100 ml with internal dimensions of 65 mm outer diameter, 45 mm inner diameter, and 67 mm height. It supports pressures up to 4 MPa at temperatures below 200°C, and up to 2 MPa at temperatures up to 300°C. An optional heating jacket with a digital temperature controller enables operation at temperatures up to 500°C, expanding its application range. Gas inlet and outlet ports with stainless steel 316 needle valves and a built-in pressure gauge (0-4 MPa) facilitate precise control of reaction atmosphere and pressure.
Wichtigste Merkmale
- Constructed from high purity titanium or SS316 stainless steel for chemical resistance and durability.
- 100 ml capacity with compact internal dimensions suitable for laboratory hydrothermal synthesis.
- Maximum operating pressure of 4 MPa below 200°C; reduced to 2 MPa at temperatures up to 300°C.
- Optional heating jacket and digital temperature controller allow heating up to 500°C with ±1°C accuracy.
- Equipped with 1/4″ stainless steel needle valves for gas inlet and outlet, enabling controlled atmosphere.
- Built-in pressure gauge for real-time pressure monitoring up to 4 MPa.
- Optional PTFE liner available to enhance chemical compatibility.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Modell | GSL-500X-XX |
| Reaktormaterial | High purity titanium (>99.95%) or SS316 stainless steel |
| Inner Dimensions (OD x ID x H) | 65 mm x 45 mm x 67 mm |
| Kapazität | ~100 ml |
| Maximaler Druck | 4 MPa (≤ 200°C), 2 MPa (≤ 300°C) |
| Working Temperature Range | Room temperature to 300°C (standard), up to 500°C with optional heating jacket |
| Gaseinlass/Gasauslass | SS316 needle valves with 1/4″ compression tube fittings |
| Pressure Gauge | Built-in, 0-4 MPa range |
| Stromversorgung | 120 VAC, 50/60 Hz, single phase (208-240 VAC optional) |
| Stromverbrauch | 500 VA |
| Temperaturregler | Optional single-point digital controller with ±1°C accuracy |
| Zertifizierungen | CE certified; NRTL or CSA available on request |
Typische Anwendungsbereiche
This hydrothermal reactor is ideal for synthesizing advanced materials such as nanomaterials, catalysts, and bio-materials under controlled high-pressure aqueous conditions. It supports research in material science, chemistry, and biotechnology where precise temperature and pressure control is essential.
Hinweise zur Konfiguration und zum Betrieb
The reactor includes stainless steel needle valves for gas inlet and outlet and a built-in pressure gauge. An optional PTFE liner can be added to improve chemical resistance. The heating jacket and digital temperature controller are optional accessories that enable elevated temperature operation up to 500°C.
For safety, it is strongly recommended to operate the high-pressure vessel inside an explosion-proof enclosure. Operators must use appropriate personal protective equipment such as gloves, goggles, and lab coats when handling the reactor under pressure.
