SEKTQ222 Digital Micrometer Adjustable Film Applicator with 216mm Coating Width and Precise Wet Film Thickness Control
The SEKTQ222 film applicator is engineered to provide accurate and repeatable wet film coatings for laboratory-scale material research. It is particularly suited for applications such as ceramic tape casting and battery electrode fabrication, where uniform film thickness and precise control are critical. The device enables researchers to produce consistent coatings at a lower cost by allowing fine adjustment of the applicator blade clearance.
This applicator utilizes digital micrometer heads to set the knife blade gap with high precision. The micrometers offer a travel range of 1 inch and read measurements with 0.001 mm resolution and 0.003 mm accuracy, including instant conversion between inch and millimeter units. The stainless steel knife blade has a precision-ground edge to ensure smooth and even film formation.
Wichtigste Merkmale
- 216 mm (8.5″) coating width suitable for a variety of sample sizes.
- Wet film thickness adjustable from 10 to 5000 microns for versatile coating requirements.
- Digital micrometer heads with 1″ travel, 0.001 mm resolution, and 0.003 mm accuracy for precise blade gap control.
- Built-in slurry guiding plate ensures even distribution of coating material ahead of the blade.
- Stainless steel knife blade with a precision ground edge for consistent film quality.
- Instant inch/millimeter conversion on micrometer readouts for user convenience.
- Replacement springs available as spare parts to maintain consistent tension.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Coating Width | 216 mm (8.5″) |
| Frame Width | 229 mm (9.0″) |
| Wet Film Thickness Range | 10 – 5000 microns |
| Micrometer Travel | 1 inch (25.4 mm) |
| Micrometer Resolution | 0.001 mm (50 millionths of an inch) |
| Micrometer Accuracy | ±0.003 mm |
| Blade Material | Stainless steel with precision ground edge |
| Additional Features | Built-in slurry guiding plate for even coating distribution |
Typische Anwendungsbereiche
The SEKTQ222 is widely used in research laboratories for producing uniform wet films in ceramic tape casting, battery electrode coating, and other thin film coating processes. Its precise thickness control makes it suitable for developing and testing new coating formulations and materials.
Hinweise zur Konfiguration und zum Betrieb
The applicator includes digital micrometer heads and a stainless steel blade as standard. Replacement springs can be purchased separately to maintain optimal blade tension. Operators should ensure the slurry guiding plate is clean and free of obstructions to achieve even coating distribution. Proper handling of the micrometer heads is recommended to preserve measurement accuracy.
