UHS6 6-Inch Ultrafast High-Temperature Sintering System with Robotic Arm and Glove Box Integration, Up to 2400°C
The UHS6 system is engineered to perform ultrafast sintering processes on samples up to 4 inches by 4 inches, addressing the need for rapid thermal treatment in controlled atmospheres. It is particularly suited for applications requiring high-temperature sintering with minimal exposure to oxygen and moisture, achieved by integrating the furnace within a glove box environment.
This system employs two independent 6″x6″ carbon felt heating elements, each with programmable temperature control and infrared sensors for precise temperature monitoring. The furnace can reach a maximum temperature of 2400°C in under 60 seconds, with heating rates exceeding 200°C per second. An automated robotic arm facilitates sample handling, enabling efficient loading and unloading without compromising the glove box atmosphere.
Wichtigste Merkmale
- Two 6″x6″ carbon felt heating elements with independent programmable temperature control.
- Maximum operating temperature of 2400°C achievable in less than 60 seconds.
- Heating rate exceeding 200°C per second for ultrafast sintering cycles.
- Integrated robotic arm for automated sample loading and unloading within the glove box.
- Glove box environment maintains oxygen and humidity levels below 1 ppm for sensitive material processing.
- Infrared sensors provide accurate temperature detection for each heating element.
- CE certified with optional NRTL or CSA certification available.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Stromversorgung | 220 VAC ±10%, Three-phase, 50/60 Hz |
| Stromverbrauch | 100 kW |
| Heizelemente | Two 6″x6″ Carbon felts with thermal insulation |
| Temperaturregelung | Two programmable controllers, independent control |
| Temperature Sensors | Two infrared (IR) sensors |
| Höchsttemperatur | 2400°C (short duration) |
| Erwärmungsgeschwindigkeit | >200°C per second |
| Sample Size Capacity | Up to 4″ x 4″ |
| Atmosphere Control | Glove box with purification system maintaining O2 and H2O <1 ppm |
| Automation | Robotic arm for automatic sample loading/unloading |
| Zertifizierungen | CE-zertifiziert; NRTL oder CSA optional |
Typische Anwendungsbereiche
The UHS6 is ideal for rapid sintering of advanced ceramics, electronic materials, and battery components where precise atmosphere control and ultrafast heating are critical. It supports research and development workflows requiring minimal contamination and high throughput.
Hinweise zur Konfiguration und zum Betrieb
The system includes the sintering furnace, glove box with integrated purification system, and robotic arm. Optional certifications such as NRTL or CSA can be requested. Operators should ensure proper glove box maintenance to sustain low oxygen and humidity levels. Safety protocols for handling high-temperature operations and robotic automation must be followed.
