OTF-1200X-25 Gas Pre-Heating Tube Furnace for Pyrolysis Reactors
The OTF-1200X-25 is engineered to preheat gases used in pyrolysis reactors, providing a controlled hot gas stream essential for efficient thermal decomposition processes. It supports gas flow rates up to 15 liters per minute, delivering outlet temperatures as high as 700°C, which is critical for maintaining consistent reaction conditions in various pyrolysis applications.
This tube furnace incorporates a 400 mm long heating zone with a maximum furnace temperature of 1100°C, allowing for flexible temperature settings. The heating coil, constructed from 1/4″ OD 310S alloy tubing with a total length of 750 mm, ensures durability and uniform heat transfer. The furnace structure features double-layer steel with air cooling and fibrous alumina insulation to optimize thermal efficiency and safety.
Wichtigste Merkmale
- Gas outlet temperature up to 700°C at 15 L/min flow rate (argon gas standard).
- Programmable temperature controller with 30 segments, PID auto-tune, and ±1°C accuracy.
- Heating coil made of corrosion-resistant 310S alloy tubing (750 mm length).
- Double-layer steel construction with fibrous alumina insulation and air cooling.
- Split door design for easy installation and maintenance of the heating coil.
- Over-temperature protection and alarm system for unattended operation safety.
- Compatible with 208-240 VAC, 50/60 Hz power supply at 2.4 kW.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Modell | OTF-1200X-25 |
| Maximum Furnace Temperature | 1100°C |
| Gas Outlet Temperature | Up to 700°C (at 10 L/min flow rate) |
| Gas Flow Rate Range | 200 ml/min to 15 L/min |
| Heating Zone Length | 400 mm |
| Heating Coil Material | 310S Alloy Tubing (1/4″ OD, 750 mm length) |
| Stromversorgung | 208-240 VAC, 50/60 Hz |
| Stromverbrauch | 2.4 kW |
| Temperaturregler | 30 programmable segments, PID auto-tune, ±1°C accuracy, over-temperature protection |
| Isolierung | Fibrous alumina |
| Structure | Double-layer steel with air cooling, split door design |
Typische Anwendungsbereiche
Ideal for preheating inert or reactive gases in pyrolysis reactors used in chemical synthesis, material processing, and thermal decomposition studies. Suitable for research and development environments requiring precise gas temperature control at varying flow rates.
Hinweise zur Konfiguration und zum Betrieb
The furnace includes a 1/4″ gas inlet and outlet equipped with valves for controlled gas flow. Gas outlet temperature is monitored by a K-type thermocouple. For safe operation, a two-stage pressure regulator must be installed on the gas cylinder to maintain pressure below 3 PSI. The system features over-temperature alarms and broken thermocouple protection to ensure safe unattended use. Optional certifications such as NRTL or CSA are available at additional cost.
