MSK-2150-H5 Pressure-Control Cold Rolling Press with 5T Max Force, 150mm Width, Glovebox Compatible, Optional Roll-to-Roll System
The MSK-2150-H5 is engineered for laboratory-scale calendaring of battery electrode materials, enabling precise control of electrode thickness and density to optimize electrochemical performance. Its pressure-controlled rolling mechanism allows researchers to simulate industrial electrode fabrication processes under tightly regulated conditions, including operation within inert atmosphere gloveboxes to prevent contamination.
This electric rolling press accommodates sample widths up to 147 mm with rollers 100 mm in diameter, constructed from hardened steel coated with chromium for durability and corrosion resistance. The pressure can be adjusted up to 5 tons via an intuitive touchscreen interface, which also displays rolling speed and actual applied pressure in real time. Rolling speed is variable from 0.1 to 2.5 meters per minute, supporting delicate processing requirements.
Wichtigste Merkmale
- Adjustable loading force up to 5 tons controlled by touchscreen for precise pressure application
- Rolling speed adjustable between 0.1 and 2.5 m/min with forward and reverse direction control
- Hardened steel rollers (HRC 58-60) sized 147 mm width × 100 mm diameter with chromium electroplated coating
- Dual micrometer system for accurate roller gap adjustment from 0 to 2.0 mm ensuring precise thickness control
- Touchscreen controller displays rolling speed, set pressure, and actual pressure with alarm alerts
- Compatible with glovebox environments using inert gases such as argon for sensitive material processing
- Optional roll-to-roll system available for continuous electrode calendaring (MSK-2150-RD)
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Maximum Loading Force | 5 tons (adjustable) |
| Rolling Speed Range | 0.1 – 2.5 m/min |
| Abmessungen der Walze | 147 mm width × 100 mm diameter |
| Roller Material & Hardness | Hardened steel, HRC 58–60, chromium electroplated coating |
| Roller Gap Adjustment | 0 – 2.0 mm via dual micrometer |
| Rolling Accuracy | ±1.5 μm |
| Motorleistung | 750 W AC motor with frequency speed controller |
| Stromversorgung | AC 110–220 V, single phase, 50/60 Hz, 1000 W |
| Digital Micrometer Range | 0 – 10 mm, resolution 0.01 mm, unit selectable (mm/in) |
| Operating Temperature | 0 – 40 °C |
| Sample Maximum Width | 140 mm |
| Einhaltung der Vorschriften | CE certified; NRTL or CSA certification available on request |
Typische Anwendungsbereiche
This rolling press is primarily used for calendaring battery electrode sheets in research and development settings, improving electrode density and uniformity. It supports processing of lithium-ion battery electrodes and can be adapted for lithium-metal electrodes with optional PTFE coating on rollers. Its glovebox compatibility makes it suitable for handling air-sensitive materials under inert atmospheres.
Hinweise zur Konfiguration und zum Betrieb
The MSK-2150-H5 includes the rolling press unit with touchscreen controller and digital micrometer. An optional roll-to-roll unit (MSK-2150-RD) can be added for continuous processing. Users must avoid rolling materials harder than 50 HRC to prevent roller damage. Multi-step thickness reduction is recommended, limiting each pass to a maximum decrement of 0.02 mm relative to the original sheet thickness. Rollers should be cleaned with acetone after each use and lubricated with anti-rust agents during extended idle periods to maintain surface integrity.
The device operates on single-phase AC power (110–220 V) and requires careful handling to ensure consistent pressure application and sample quality. The digital micrometer is battery powered and allows precise measurement of roller gap with selectable units. The machine’s compact design facilitates integration into glovebox setups for controlled atmosphere processing.
