YLJHP15L Large Hydraulic Laminating Hot Press with 40T Force, Up to 400°C, Optional 15″ or 24″ Stainless Steel Heated Platens
The YLJHP15L is engineered to address the demanding requirements of lamination processes involving polymer and ceramic materials. It provides precise control over temperature and pressure to ensure uniform bonding and material integrity during hot pressing. This model is ideal for laboratory-scale sample preparation where high force and controlled heating are essential.
This hot press integrates a hydraulic system capable of delivering a maximum pressing force of 40 tons through manual operation. The pressing force is accurately monitored by a pressure gauge with a measuring accuracy of ±1.25 kN. Two stainless steel heated platens, available in either 15″x15″ or 24″x24″ dimensions, are independently controlled by digital temperature controllers with a maximum continuous operating temperature of 400°C. The platens feature water cooling jackets to enable rapid cooling immediately after pressing, enhancing process efficiency and sample handling.
Wichtigste Merkmale
- Hydraulic press with separated pump and cylinder for easy maintenance and replacement.
- Maximum pressing force of 40 tons with manual operation and precise pressure monitoring.
- Two heated platens made of SS304 stainless steel with CNC-ground flat surfaces for uniform heat transfer.
- Optional platen sizes: 381 mm x 381 mm (15″x15″) or 610 mm x 610 mm (24″x24″).
- Independent digital temperature controllers with 30-segment programmable profiles and ±2°C accuracy.
- Water cooling jackets on both platens with 1/4″ pipe connectors and included 16 L/min recirculating water chiller for rapid cooling.
- Maximum platen opening height and travel distance of 120 mm, with operational limits to protect the hydraulic cylinder.
- Power supply options: 208-240 VAC, single phase, with power ratings of 3.5 kW for 15″ platens and 10 kW for 24″ platens.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Modell | YLJHP15L |
| Maximum Force | 40 Tons (Hydraulic) |
| Betrieb | Manual |
| Pressure Gauge Accuracy | ±1.25 kN |
| Heated Platen Material | SS304 Stainless Steel |
| Heated Platen Sizes | 381 x 381 mm (15″x15″) or 610 x 610 mm (24″x24″) |
| Max. Working Temperature | 400°C Continuous with Water Cooling |
| Heating & Cooling Rate | ≤ 2°C/min |
| Water Cooling Jackets | Installed on both platens with 1/4″ pipe connectors |
| Max. Travel Distance | 120 mm (Do not exceed 80 mm piston travel) |
| Max. Opening Height | 120 mm |
| Temperaturregelung | Two digital controllers, 30-segment programmable, ±2°C accuracy |
| Stromversorgung | 208-240 VAC, 50/60 Hz, Single Phase |
| Stromverbrauch | 3.5 kW (15″ platen), 10 kW (24″ platen) |
Typische Anwendungsbereiche
This hot press is suitable for preparing polymer and ceramic samples requiring precise lamination under controlled heat and pressure. It is widely used in materials research, composite fabrication, and sample preparation for analytical testing.
Hinweise zur Konfiguration und zum Betrieb
The hydraulic pump and cylinder are designed as separate components for ease of maintenance and replacement. The unit includes a stainless steel protection door for operator safety. An electric hydraulic pump is available as an optional accessory to enable automatic pressure control, though pumping cycles may take up to 20 minutes. The water cooling system includes a 16 L/min recirculating chiller to rapidly reduce platen temperature after processing. Operators should avoid exceeding the maximum piston travel distance of 80 mm to prevent equipment damage.
