URTP-2200A Compact Ultrafast Joule Heating System with Vacuum Chamber
The URTP-2200A is engineered to rapidly heat small material samples to extremely high temperatures, reaching up to 2200°C within milliseconds. This capability is essential for applications requiring ultrafast thermal processing under controlled atmospheres such as vacuum or inert gas environments. The system’s compact design integrates a stainless steel vacuum chamber and a Joule heating element to enable precise and rapid temperature ramping.
The vacuum chamber measures 12 inches by 12 inches by 11 inches and includes a KF25 vacuum port for connection to an external vacuum pump (156L capacity pump required but not included). Heating is performed via a flat-plate carbon sheet heater capable of accommodating up to 3 mL of sample volume. Temperature is monitored and controlled by a digital infrared sensor and programmable controller, allowing accurate temperature profiles with ±3°C precision over a range from approximately 400°C to 2200°C.
Wichtigste Merkmale
- Ultrafast Joule heating technology achieving up to 2200°C within milliseconds.
- Stainless steel vacuum chamber (12″x12″x11″) with KF25 vacuum port for controlled atmosphere processing.
- Flat-plate carbon sheet heater included for sample heating up to 3 mL capacity.
- Programmable temperature controller with digital IR sensor for precise temperature measurement and control.
- Selectable pulse mode operation at 1 Hz or 50 Hz for heating modulation.
- RS485 communication port and software for PC connection and temperature profile recording.
- Compatible with 110–240 VAC single-phase power input; power supply included.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Höchsttemperatur | 2200°C |
| Temperaturbereich | Approx. 400–2200°C |
| Temperaturgenauigkeit | ±3°C |
| Heizverfahren | Joule heating via carbon sheet heater |
| Vacuum Chamber Material | Stainless steel |
| Vacuum Chamber Dimensions | 12″ x 12″ x 11″ |
| Vakuumanschluss | KF25 |
| Sample Capacity | Up to 3 mL |
| Power Supply Input | 110–240 VAC, 50/60 Hz, single phase |
| Power Supply Output | 15 VDC, 125 A max (120 VAC input); 17.4 VDC, 185 A max (220 VAC input) |
| Pulse Mode Frequency | Selectable 1 Hz or 50 Hz |
| Temperatursensor | Digital infrared sensor |
| Control Interface | Programmable controller with RS485 port |
| Max Heating Duration | 60 seconds (water cooling electrode required for longer use, optional) |
| Zertifizierungen | CE Certified (NRTL/CSA not available) |
Typische Anwendungsbereiche
The URTP-2200A is suitable for rapid thermal processing tasks such as sintering, annealing, and material phase transformation studies requiring ultrafast heating under vacuum or inert atmospheres. It is ideal for research in materials science, thin film development, and advanced ceramics where precise temperature control and fast ramp rates are critical.
Hinweise zur Konfiguration und zum Betrieb
The system includes the vacuum chamber, carbon sheet heater, digital IR sensor, programmable controller, and NRTL-certified power supply. A 156L vacuum pump is required but must be sourced separately. For heating durations exceeding 60 seconds, a water cooling electrode is recommended and available as an optional accessory at additional cost. Users should ensure proper vacuum connections and follow safety protocols when operating at high temperatures and under vacuum conditions.
Maße & Versand
| Product dimensions | & Net weight; Vacuum chamber: 580 x 430 x 420 mm (L x W x H); Power Unit: 700*850*360mm (L*W*H) |
|---|
