KSL-1200X-AC-5S Five-Side Heating Atmosphere-Controlled Muffle Furnace with 64L Capacity and Up to 1200°C Max Temperature
The KSL-1200X-AC-5S furnace is engineered for advanced laboratory material processing requiring precise temperature control and atmosphere management. It is ideal for applications such as material synthesis, thermal treatments, and controlled atmosphere experiments where uniform heating and gas environment control are critical. The furnace chamber is hermetically sealed, allowing operation under inert, reducing, or oxidative gas atmospheres, supporting a wide range of experimental conditions.
This model features five-sided heating with Kanthal Fe-Cr-Al resistance elements embedded in high-quality alumina fiber insulation, ensuring excellent temperature uniformity within a 300 × 300 × 300 mm zone at ±2°C at 800°C. The working chamber volume is 64 liters (400 × 400 × 400 mm), accommodating sample loads up to 35 kg. Continuous operation is supported up to 1100°C, with a maximum temperature of 1200°C allowed for short durations under controlled conditions.
Wichtigste Merkmale
- Hermetic steel chamber with water-cooling jacket for atmosphere control and vacuum operation.
- Five-side heating design for superior temperature uniformity and efficient thermal distribution.
- 64-liter heating volume with a uniform temperature zone of 300 × 300 × 300 mm ±2°C at 800°C.
- PID temperature controller (FA-YD518P-AG) with 30 programmable segments and ±1°C accuracy; optional Eurotherm controller upgrade available.
- Supports inert, air, oxygen, and 5% hydrogen non-flammable gas atmospheres with gas flow meters and vacuum capability down to <0.5 torr.
- Includes Omega dual K-type thermocouple and safety alarms for over-temperature and thermocouple failure.
- Optional stainless steel 310 retort (300 × 300 × 300 mm) available for debinding processes with dedicated gas inlet/outlet.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Modell | KSL-1200X-AC-5S |
| Heizverfahren | Five-side Kanthal Fe-Cr-Al resistance heating |
| Heating Chamber Size | 400 × 400 × 400 mm (64 L) |
| Uniform Temperature Zone | 300 × 300 × 300 mm ±2°C @ 800°C |
| Maximum Continuous Temperature | 1100°C |
| Maximum Short-Time Temperature | 1200°C (less than 1 hour) |
| Temperaturregler | FA-YD518P-AG PID, 30 programmable segments, ±1°C accuracy; Eurotherm optional |
| Thermoelement | Omega Dual K Type, 12″ length, 1/4″ OD |
| Stromversorgung | 9.5 kW, 208-240 V single phase, 50/60 Hz (3-phase options available) |
| Vakuumfähigkeit | < 0.5 torr via KF25 port |
| Gas Flow Control | Two 8 L/min float flow meters installed |
| Vakuumpumpe | 240 L/min rotary vane pump, 110V or 208-240VAC |
| Wasserkühlung | 16 L/min recirculating water chiller with alarms |
| Sample Load Capacity | Up to 35 kg |
| Erwärmungsgeschwindigkeit | Recommended < 10°C/min, max 20°C/min |
| Working Gases | Inert gas, air, oxygen, 5% hydrogen non-flammable gas |
Typische Anwendungsbereiche
This furnace is suited for controlled atmosphere thermal processing such as material synthesis, sintering, annealing, and debinding. It supports research and development in ceramics, metallurgy, battery materials, and other advanced materials requiring precise temperature and atmosphere control.
Hinweise zur Konfiguration und zum Betrieb
The furnace includes a 10-foot power cord without a plug. Optional upgrades include a Eurotherm temperature controller and a stainless steel 310 retort for debinding applications. The retort features its own gas inlet and outlet ports. Users should avoid toxic, corrosive, or flammable gases unless consulting with engineering support. Safety alarms for over-temperature and water chiller failure are integrated.
