YLJ-40TA-PE 45T Electric Lab Press with Programmable Hydraulic Pump and KF40 Feedthrough Option for Glovebox Use
The YLJ-40TA-PE is designed for laboratory pressing tasks requiring up to 45 metric tons of force, ideal for preparing ceramic compounds or powder metallurgy samples. Its configuration separates the electric hydraulic pump from the pressing frame, simplifying maintenance and replacement procedures. This design also supports integration with gloveboxes through an optional KF40 feedthrough, allowing controlled atmosphere pressing operations.
This press features a motorized hydraulic pump powered by a 150W output motor operating at 208-240VAC (50/60Hz), with a 110V version available via transformer. The pump includes a built-in digital pressure controller capable of programming up to 30 pressure segments with specified dwell times, enabling precise multi-step pressure profiles during sample pressing. Pressure settings must increase monotonically, and multi-step pressure relief is not supported. A speed controller adjusts the pump speed for optimized operation.
Wichtigste Merkmale
- Maximum pressing force of 45 metric tons with a hydraulic pump pressure up to 65 MPa.
- Separate electric hydraulic pump unit with RS-485 communication port for optional PC control via LabVIEW software.
- 30-segment programmable pressure and dwell time control for complex pressing cycles.
- Optional KF40 feedthrough flange for hydraulic hose enables press operation inside gloveboxes.
- Pressure accuracy of ±0.5 MPa at high pump speeds and ±0.1 MPa at low speeds.
- Hydraulic cylinder travel distance of 0 to 12 mm and working space of 150 mm × 150 mm × 150 mm.
- Transparent protective cover on the pressing machine front for operator safety.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Maximum Pressing Force | 45 Metric Tons |
| Maximum Pump Pressure | 65 MPa |
| Eingangsspannung | 208-240 VAC, 50/60 Hz (110 V version via transformer) |
| Output Power | 150 W |
| Hydraulic Oil | ISO46, 1.5 L |
| Hydraulic Hose | ZG3/8, 1 meter length (optional 3-meter hose with KF40 feedthrough) |
| Pressure Controller | Built-in digital controller, 30 programmable segments, monotonic pressure increase only |
| Pressure Accuracy | ±0.5 MPa (high speed), ±0.1 MPa (low speed) |
| Hydraulic Cylinder Travel | 0 – 12 mm |
| Working Space (WxDxH) | 150 mm × 150 mm × 150 mm |
| Operation Temperature | 10 – 40 °C |
| Kommunikationsschnittstelle | RS-485 port for PC operation |
| Optional Accessories | Touch-screen electric pump controller, KF40 feedthrough with 3-meter hydraulic hose, pressing dies of various diameters |
Typische Anwendungsbereiche
This press is suitable for preparing ceramic and powder metallurgy samples where precise pressure control and programmable pressing cycles are required. It is especially useful for research environments needing glovebox integration to handle sensitive or reactive materials under controlled atmospheres.
Hinweise zur Konfiguration und zum Betrieb
The standard package includes the 40T hydraulic pressing machine with the electronic hydraulic pump, an Allen hex wrench set, and a manual CD. The KF40 feedthrough and longer hydraulic hoses are optional and must be ordered separately. Pressing dies of various diameters are also available as optional accessories.
Users should ensure particle sizes are below 30 microns to avoid damage to the pressing die components and clean the dies thoroughly after each use, preferably with ethanol. The hydraulic cylinder piston should not be raised beyond its maximum travel of 25 mm. Protective goggles are mandatory during operation for safety.
Maße & Versand
| Product dimensions | Pressing Unit Dimensions: 240mm x 210mm x 670mm (L x W x H, H is included with the handwheel lifting to the highest position ); Control Unit Dimensions: 220mm x 200mm x 480mm (L x W x H) |
|---|
