YLJ-40 40T Manual Hydraulic Laboratory Press with Separable Pump and Safety Shield for Pellet Sample Preparation
The YLJ-40 is a manual hydraulic press designed to deliver up to 40 metric tons of pressing force, making it suitable for preparing compound or ceramic pellet samples in material science and chemistry laboratories. Its separable pump design facilitates straightforward maintenance and ensures reliable operation over extended use. The press accommodates a maximum working space of 80 mm in diameter and 170 mm in height, allowing for versatile sample sizes.
Equipped with a hydraulic cylinder diameter of 106 mm and a cylinder travel distance ranging from 0 to 16 mm, the YLJ-40 offers precise control over pressing depth. The top support screw is adjustable up to 170 mm in height to accommodate different sample thicknesses. A polycarbonate safety shield is included as standard to protect operators during pressing operations, with the requirement that the door remains closed during use for safety compliance.
Wichtigste Merkmale
- Manual hydraulic press with separable pump for easy maintenance
- Maximum pressing force of 40 metric tons suitable for pellet sample preparation
- Adjustable cylinder travel distance from 0 to 16 mm for precise pressing control
- Top support screw adjustable height up to 170 mm for variable sample thickness
- Hydraulic cylinder diameter of 106 mm ensuring stable force application
- Includes polycarbonate safety shield for operator protection during use
- Optional pressing dies available in various diameters for customized sample pressing
- Optional electric pump with programmable pressure control for glovebox applications
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Maximaler Druck | 40 Metric Tons |
| Cylinder Travel Distance | 0 – 16 mm |
| Top Support Screw Adjustable Height | 170 mm |
| Hydraulic Cylinder Diameter | 106 mm |
| Max Working Space | 80 mm Diameter x 170 mm Height |
| Pressure Gauge Range | 11 to 57 MPa |
| Corresponding Cylinder Force | 10 to 45 Tons (calculated as 0.88 × Gauge MPa) |
| Safety Feature | Polycarbonate Safety Shield (door must be closed during operation) |
Typische Anwendungsbereiche
This press is ideal for producing ceramic or compound pellets used in materials research, chemical analysis, and sample preparation for spectroscopy or other analytical techniques. It is commonly employed in laboratories requiring precise and repeatable pellet pressing for powder materials with particle sizes between 32 and 75 microns.
Hinweise zur Konfiguration und zum Betrieb
The standard package includes the YLJ-40 press with built-in manual hydraulic pump, polycarbonate safety shield, hydraulic oil, Allen hex wrench set, and an operation manual. Pressing dies of various diameters are available as optional accessories at additional cost. An electric pump option with programmable pressure control is offered for use inside gloveboxes; however, the manual pump feedthrough is not compatible with glovebox operation.
Operators should avoid pressing powders with particle sizes below 30 microns to prevent damage to the pressing die. It is recommended to sieve powders to 32–75 microns before pressing. After each use, clean the pressing die with ethanol. Always wear protective goggles during operation and ensure the safety shield door is closed. Do not exceed the maximum piston travel distance of 25 mm. Check hydraulic oil levels and remove air from the oil tank if the press has been idle for extended periods.
