EQ-KSL-1200X-BF6 1000°C Seven-Zone Conveyor Belt Furnace with 150mm Width and 2000mm Length, Advanced Temperature Control
The EQ-KSL-1200X-BF6 is designed for continuous thermal processing of materials requiring precise temperature profiles over an extended conveyor length. It is ideal for pilot-scale manufacturing tasks such as thick film firing, sintering of ceramics and metals, photovoltaic cell fabrication, and other high-temperature treatments under controlled atmospheres. The furnace accommodates workpieces up to 6 inches wide and 1 inch high, transported on a mesh conveyor belt through seven independently controlled heating zones.
This furnace operates by moving samples on a quartz-supported mesh belt through sequential heating modules, each equipped with Kanthal heating elements and monitored by dual thermocouples for accurate temperature regulation. The seven zones, each 300 mm in length, allow customized temperature programming via a large touchscreen controller, enabling complex thermal profiles with a heating rate up to 10°C per minute. The system includes a 300 mm cooling section at the furnace exit to stabilize samples post-processing.
Wichtigste Merkmale
- Maximum operating temperature of 1000°C with continuous operation at 900°C
- Seven modular heating zones with individual temperature control and dual thermocouple monitoring
- Mesh conveyor belt (130 mm wide × 10 mm thick × 6200 mm long) supported by quartz supports
- Automatic feed loading and product unloading for continuous processing
- Touchscreen controller enabling remote operation and precise temperature programming
- High purity fibrous alumina insulation and dual-layer design to maintain casing surface below 70°C
- Power supply: AC 208-240V, three phase, approximately 50A per phase, total max power 19 kW
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Höchsttemperatur | 1000°C (1050°C max, 900°C continuous) |
| Heizzonen | 7 independent zones, each 300 mm length |
| Total Heating Length | 2100 mm |
| Heating Zone Width | 150 mm (6″) |
| Conveyor Belt | Mesh type, 130 mm wide × 10 mm thick × 6200 mm long |
| Max Sample Size | 6″ width × 1″ height |
| Conveyor Speed | 10 to 100 mm/second, variable |
| Stromversorgung | AC 208-240V, three phase, 50/60 Hz |
| Stromverbrauch | 19 kW max (~3 kW per zone) |
| Temperaturregelung | Touchscreen controller with dual thermocouples per zone, ±1°C accuracy |
| Isolierung | High purity fibrous alumina with dual-layer design |
| Cooling Section | 300 mm integrated at furnace exit |
| Gewicht | Approx. 1000 lb (453.6 kg) |
Typische Anwendungsbereiche
- Metal and ceramic sintering
- Thick film firing for electronic components
- Fast drying and curing processes
- Calcination and carbonization
- Gas-solid reactions and purification
- Metallization steps in solar cell fabrication
Hinweise zur Konfiguration und zum Betrieb
The furnace modules are modular and can be customized in length from 300 mm up to 2100 mm total. The heating zone width can be increased up to 12″ upon request. The power cord is included but without a plug. Safety precautions should be observed due to high operating temperatures and electrical power requirements. Optional certifications such as NRTL/CSA are available for an additional charge.
