KSL1200XMF-AC Muffle Furnace with 310S Alloy Chamber for Debinding, 1100°C Max, 12x12x12″ Heating Chamber
The KSL1200XMF-AC is designed to support debinding and sintering processes requiring controlled atmospheres and high temperatures up to 1100°C. Its 12″ x 12″ x 12″ heating chamber accommodates a 310S stainless steel alloy inner chamber measuring 9″ x 9″ x 10″, which is ideal for preparing porous materials by removing binders or glues. This alloy chamber features gas inlet and outlet tubes to facilitate the flow of inert or reducing gases, protecting oxygen-sensitive samples during sintering.
This furnace employs nickel-chromium-aluminum wire heating elements embedded in high-purity fibrous alumina, providing uniform heating on three sides. The temperature controller is physically separated from the furnace body to enhance operator safety and features PID control with auto-tuning, programmable ramping, cooling, and dwelling steps. Temperature stability is maintained within ±1°C, ensuring precise thermal profiles for sensitive processes.
Wichtigste Merkmale
- Heating chamber dimensions: 12″ x 12″ x 12″ (304 x 304 x 304 mm) with 27 liters capacity
- 310S alloy inner chamber with hinged door, 9″ x 9″ x 10″ (230 x 230 x 250 mm), approx. 13.2 liters capacity
- Gas inlet and outlet tubes (8 mm ID) for controlled atmosphere processing
- Maximum operating temperature of 1100°C with alloy chamber installed; 1200°C without
- Ni-Cr-Al wire heating elements embedded in fibrous alumina for efficient heating
- PID temperature controller with 30 programmable segments, over-temperature and thermocouple failure alarms
- 208-240V AC single-phase power supply, 12.5 kW power consumption
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Heating Chamber Size | 12″ x 12″ x 12″ (304 x 304 x 304 mm) |
| Heating Chamber Capacity | 27 liters |
| Inner Alloy Chamber Size | 9″ x 9″ x 10″ (230 x 230 x 250 mm) |
| Inner Alloy Chamber Capacity | ~13.2 liters |
| Inner Chamber Material | 310S stainless steel alloy |
| Heating Element | Ni-Cr-Al wire embedded in high purity fibrous alumina |
| Heating Sides | Three sides |
| Maximale Betriebstemperatur | 1100°C with alloy chamber, 1200°C without |
| Temperaturstabilität | ±1 °C |
| Temperaturregler | FA-YD518P-AG PID controller, 30 programmable segments, over-temp alarm |
| Gas Inlet/Outlet Tubes | 8 mm ID inlet at rear, 8 mm ID outlet at top |
| Stromversorgung | 208-240V AC, single phase, 50/60 Hz |
| Stromverbrauch | 12.5 kW |
| Breaker | 60 A (installed) |
| Nettogewicht | Approx. 350 lb |
Typische Anwendungsbereiche
This muffle furnace is well suited for debinding processes in ceramic and metal powder processing, sintering oxygen-sensitive materials under controlled atmospheres, and preparing porous materials by removing binders or glues. Its gas inlet and outlet allow for inert or reducing gas flow, making it ideal for research and production environments requiring precise atmosphere control.
Hinweise zur Konfiguration und zum Betrieb
The furnace includes a hinged 310S alloy chamber with gas inlet and outlet tubes but is not airtight; it effectively prevents smoke damage to the heating elements. For air-sensitive samples, a gas mixture such as 5% H2 + 95% Ar is recommended to avoid oxidation. The temperature controller is included and supports PC communication via DB9 port with software. Power cable is supplied without a plug; users must install an appropriate plug for their region.
Compliance & Certifications
The unit is CE certified. Optional NRTL (UL61010) or CSA certification is available upon request at additional cost.
