ALOBALL10 Hochreine 92%-Aluminiumoxid-Mahlkugeln, 10 mm Durchmesser, 1-kg-Packung für Labormühlen
ALOBALL10 milling balls are designed to meet the demanding needs of laboratory-scale ball milling processes where material purity and mechanical durability are critical. These ceramic balls, composed primarily of alumina (Al2O3) with a purity exceeding 92%, provide an effective grinding medium for fine and uniform particle size reduction in various materials.
The 10 mm diameter balls offer an optimal balance between surface area and impact energy, suitable for milling applications requiring moderate to high energy input. Their high hardness, measured between 15 and 15.6 on the Vickers scale, ensures resistance to wear and deformation, extending their service life during repetitive milling cycles.
Wichtigste Merkmale
- High purity alumina ceramic composition (>92% Al2O3) with minimal impurities (SiO2 <6.5%, Fe2O3 <0.01%, CaO + MgO + Na2O + others <1.5%)
- Uniform 10 mm diameter for consistent milling performance
- Typical hardness of 15-15.6 Vickers for excellent wear resistance
- Packaged in 1 kg quantities suitable for laboratory ball mills
- Compatible with various ball milling machines used in research and development
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Material Composition | Al2O3 > 92%, SiO2 < 6.5%, Fe2O3 < 0.01%, CaO + MgO + Na2O + others < 1.5% |
| Diameter | 10 mm |
| Nettogewicht | 1 kg per pack |
| Typical Hardness | 15 – 15.6 Vickers |
Typische Anwendungsbereiche
These alumina milling balls are ideal for use in laboratory ball mills for grinding and homogenizing powders in chemical, pharmaceutical, ceramic, and materials science research. Their high purity and hardness make them suitable for milling sensitive materials where contamination and wear debris must be minimized.
Hinweise zur Konfiguration und zum Betrieb
ALOBALL10 balls are supplied in 1 kg packs and are intended for use as grinding media in compatible laboratory ball milling equipment. Users should ensure proper handling to avoid contamination and inspect balls regularly for wear or damage to maintain milling efficiency.
