MSK-121 Pouch Cell Current Collector Tab Shaping Machine
The MSK-121 is engineered to prepare current collector metal tabs used in pouch cell battery manufacturing by performing precise slitting and ironing operations. This machine is essential for pilot line setups where accurate tab shaping is critical before welding processes. It accommodates pouch cells with a maximum width of 200 mm and tape widths up to 100 mm, ensuring compatibility with a range of pouch cell designs.
The device integrates two distinct working stations: one dedicated to slitting or cutting the metal tab to size, and the other for ironing or flattening the tab to ensure uniform thickness and surface quality. Both stations can apply a maximum pressure of 1,000 kgf, enabling effective shaping of the current collector tabs. The machine requires pneumatic control with an air pressure supply of 85 psi, which must be provided externally as the air compressor is not included.
Key Features
- Dual working stations for slitting and ironing current collector tabs.
- Maximum slitting blade width of 200 mm with up to 1,000 kgf pressure.
- Ironing station applies up to 1,000 kgf pressure for tab flattening.
- Compatible with pouch cell widths up to 200 mm and tape widths up to 100 mm.
- Operates on AC 110V or 220V power supply with 100 W consumption.
- Requires external pneumatic control with 85 psi air pressure (compressor not included).
- CE certified for compliance with safety standards.
Technical Specifications
| Parameter | Specification |
|---|---|
| Input Voltage | AC 110V or 220V ±10%, 50/60 Hz |
| Power Consumption | 100 W |
| Pneumatic Control | Requires 85 psi air pressure (air compressor not included) |
| Maximum Pouch Cell Width | 200 mm |
| Maximum Tape Width | 100 mm |
| Slitting Blade Width | 200 mm |
| Maximum Slitting Pressure | 1,000 kgf |
| Maximum Ironing Pressure | 1,000 kgf |
| Certification | CE Certified |
Typical Applications
The MSK-121 is primarily used in battery research and development labs and pilot production lines for pouch cells. It prepares current collector tabs by cutting and flattening metal strips to precise dimensions and surface conditions required for reliable welding and assembly in lithium-ion pouch cell manufacturing.
Configuration & Operating Notes
This machine requires an external pneumatic air supply at 85 psi, which is not included. Users may use an air compressor or a gas cylinder with a two-stage pressure regulator to maintain safe operating pressure. The machine operates on either 110V or 220V AC power, selectable at purchase. Proper installation and pressure regulation are critical for safe and effective operation.
