MSK-520A Automatic Roll-to-Sheet Cutting Machine for Precise Electrode Slitting
The MSK-520A is engineered to streamline the process of converting electrode material from roll form into accurately sized sheets, a critical step in battery electrode fabrication. This machine addresses the need for precise, continuous cutting of electrode rolls, ensuring uniform sheet length and width for downstream processing.
Equipped with an automatic tension control system, the MSK-520A maintains optimal material tension up to 30 N to prevent deformation during cutting. The device supports electrode widths ranging from 10 mm to 290 mm and can handle roll diameters up to 300 mm. Cutting accuracy is maintained within ±0.3 mm, with a maximum linear cutting speed of 2 meters per minute. The control interface features a PLC touchscreen panel for intuitive operation and minor edge adjustments during continuous cutting.
Key Features
- Automatic tension control system ensuring consistent material handling up to 30 N tension.
- Cutting width adjustable between 10 mm and 290 mm for versatile electrode sizes.
- Continuous fixed-length cutting mode with minor edge adjustment capability for precision.
- PLC touchscreen control panel for user-friendly operation and parameter setting.
- Supports electrode roll diameters up to 300 mm for large batch processing.
- Cutting accuracy maintained within ±0.3 mm for high-quality sheet output.
- Maximum linear cutting speed of 2 m/min to balance throughput and precision.
Technical Specifications
| Parameter | Specification |
|---|---|
| Working Voltage | Single-phase 208~240 VAC, 50/60 Hz |
| Maximum Power Consumption | 500 W |
| Acceptable Electrode Width | 10 mm to 290 mm |
| Cutting Accuracy | ±0.3 mm |
| Tension Control | Maximum 30 N |
| Maximum Linear Cutting Speed | 2 m/min |
| Maximum Electrode Roll Diameter | 300 mm O.D. |
| Compressed Air Requirement | 0.5 to 0.8 MPa (air compressor not included) |
Typical Applications
This machine is ideal for battery research and production environments where electrode materials in roll form must be precisely cut into sheets for assembly. It supports various electrode widths, making it suitable for lithium-ion battery electrode preparation and other electrochemical device manufacturing.
Configuration & Operating Notes
The MSK-520A requires a compressed air supply within 0.5 to 0.8 MPa for operation; an air compressor is necessary but not included. If using a gas cylinder instead of an air compressor, a two-stage pressure regulator must be installed to ensure safe pressure levels. The machine includes a PLC touchscreen for control but does not come with an air compressor or gas regulator as standard accessories.
