SE-KTQ-80F Micrometer Adjustable Film Applicator with 80 mm Width for Precise Wet Film Thickness Control
The SE-KTQ-80F film applicator is engineered for laboratory environments requiring precise control over wet film thickness during coating processes. It is particularly suited for applications such as ceramic tape casting, battery electrode fabrication, and other research tasks where consistent film quality is critical. This applicator enables researchers to produce uniform films with thicknesses ranging from zero up to 3000 microns.
The device operates by adjusting the clearance between a stainless steel knife blade and the substrate using micrometer heads. These micrometers allow the operator to set the blade gap with a fine resolution of 5 microns, ensuring accurate and repeatable film thickness. The blade itself is precision ground to maintain a sharp, consistent edge for smooth coating application.
Key Features
- Standard 80 mm blade width suitable for small to medium sample sizes
- Wet film thickness adjustable from 0 to 3000 microns with high precision
- Micrometer heads provide blade clearance control with 5 micron accuracy
- Durable stainless steel knife blade with precision ground edge for consistent coating
- Simple mechanical adjustment allows quick and repeatable setup
- Replacement springs available for maintenance to ensure long-term performance
Technical Specifications
| Parameter | Specification |
|---|---|
| Blade Width | 80 mm |
| Wet Film Thickness Range | 0 to 3000 microns |
| Micrometer Adjustment Accuracy | 5 microns |
| Blade Material | Stainless Steel, precision ground edge |
Typical Applications
This applicator is widely used in material research laboratories for producing uniform coatings in ceramic tape casting, battery electrode preparation, and other wet film coating processes requiring precise thickness control.
Configuration & Operating Notes
The SE-KTQ-80F includes the micrometer-adjustable applicator with stainless steel blade. Replacement springs are available separately to maintain consistent blade pressure over time. Operators should ensure proper cleaning and calibration of the micrometer heads for accurate thickness settings. For small slurry quantities, complementary equipment such as micro-vibration mills or auto-grinders may be considered to prepare coating materials.
